Drstrangefart
Member
She picked out Camphor for the wood (Probably won't be turning more of that for a while) and we settled on some Corian for the center band. I let her pick between silver and gold for the kit, and we had different stickers that would likely have popped on the pen better, but they were really not good for this application. My oldest one handled a good bit of the turning, did a great job on all of the cross-sanding, and was going to help polish, but the MicroMesh kept eating through at the corners of the stickers and I needed to make sure I mitigated the damage as much as possible. The Camphor is courtesy of Bobalu, and the Corian is courtesy of Reddwil. I used a LOT of all 3 CA thicknesses to get a polish on it, and it definitely tested my patience.