cmccarter
Member
What is the length of the 10mm tube that comes with the kit. the instructions say make the blank 2 1/16" so is the tube 2"?
That cutting remark wasn't necessary. I found the video helpful, not silly.
Frankly, sir, your posts have little utility, and have devolved into nothing but snark.
The answer was clearly give in post #2. The youtube link was not needed, also worth pointing out that many are unable to watch youtube vids for various reasons.
Accurate and Pleasant, that's what it is supposed to be about. I blocked a certain person so I don't have to see his drivel(sp) anymore. I found myself getting upset at the horrible and quite often just BAD advice, along with the fights that were started. So I blocked him and the IAP is a nicer place for me.:biggrin:There is no such thing as "too much ACCURATE information", IMO> that is the purpose of a forum--education and pleasant suggestions, on the topic.
In over 20,000 such posts, I have mostly added friends. You, Ed, have chosen instead to see how much you can irritate me. Sorry, not gonna work.
The answer was clearly give in post #2. The youtube link was not needed, also worth pointing out that many are unable to watch youtube vids for various reasons.
Anyway.... I would suggest making one pen and see how it works out. You'll know where you stand for the next levers. Your first one will be the guide for tube length. I made 3. Used wood for them. They'll novel. People liked them.
Anyway.... I would suggest making one pen and see how it works out. You'll know where you stand for the next levers. Your first one will be the guide for tube length. I made 3. Used wood for them. They'll novel. People liked them.
Correct.
1 test is worth 100 expert opinions and 200 used car salesman opinions. In the end the results are well worth it.