TheAcadian
Member
Does anyone know what the Jr Gent II finial diameter is? I need to pop the stock one out and replace with my own custom one, but I don't have the measurements.
Thanks!
Thanks!
Are you referring to the entire finial, or the black insert?
If you are turning the black insert, I can pop one out and measure, but if you have calipers try to make it custom fit (and you'll need the calipers to make the insert anyway).
Are you referring to the entire finial, or the black insert?
If you are turning the black insert, I can pop one out and measure, but if you have calipers try to make it custom fit (and you'll need the calipers to make the insert anyway).
Sorry, yes, the black insert.
Are you referring to the brass riveted circle on top of the cap? Many punch those out and turn new ones. If you, I would suggest just use the removed piece as a model and replace with yours. I use calipers to measure from one to the other.
If they are CSUSA Jr. Gent II's, the diameter is .428.
I had a bunch of these made last year for a large pen order. .428 fit just fine in the recess at the top of the cap piece.