alamocdc
Member
This was my biggest piece of IBO so I thought it deserved a Black TN kit. It was barely big enough (that's also why it's B2B) and if it weren't for my PHD vise, I'd never have been able to get this drilled right. Before some of you say, "You could also have drilled it straight on the lathe.", I tired that first. The problem is that the blank was trapezoidal and I couldn't get it chucked up straight enough to be confident that I wouldn't ruin it. Dipped lacquer finish, and I didn't seal all the pores. I let the lacquer seal what it could and I did use Deft Sanding Sealer during the sanding process. Anyway, here it is.
Thanks for taking time to look and as always, feel free to hammer away. Looks like I didn't get all the TSW residue off, so I'll have to double check that.[:I]
Thanks for taking time to look and as always, feel free to hammer away. Looks like I didn't get all the TSW residue off, so I'll have to double check that.[:I]