I can't turn a pen!

[Madman1978]

I am looking for this part for my PenPal lathe.

Internal Spindle Adapter

Use this handy internal adapter to convert your 1 x 8tpi female accessory (i.e. lathe chuck) to an internal 3/4in x 16tpi female thread. Just screw in the adapter and you're ready to go.

www.pennstateind.com

LMK if you have one or to sell.

 

[Robert Taylor]

temporarily out of stock at pennstate. try woodturningz or exotic blanks.

Internal Spindle Adapter

Use this handy internal adapter to convert your 1 x 8tpi female accessory (i.e. lathe chuck) to an internal 3/4in x 16tpi female thread. Just screw in the adapter and you're ready to go.

www.pennstateind.com

Grizzly shows it "in stock" if Springfield is Springfield, Mo.

 

[Dehn0045]

Adapter 3/4 x 16 TPI RH to 1 x 8 TPI

This adapter allows you to go from 3/4" x 16 TPI RH to 1" x 8 TPI on your wood lathe chuck.<p><ul><li>Male thread = 1 x 8<li>Female thread = 3/4 x 16</ul>

www.grizzly.com

 

[Mr Vic]

Might try Amazon as well: https://www.amazon.com/PSI-Woodwork...adapter&qid=1602168363&sr=8-6&tag=googhydr-20

 

[walshjp17]

Amazon shows two left - 3/4x16 to 1x8.

 

[Madman1978]

Amazon shows two left - 3/4x16 to 1x8.

It was 3! I bought one