Accelerator in general raises the percentages of cloudiness. Sometimes, it is because the wood is still slightly green or has moisture in it; sometimes it is because the ends were not sealed and moisture got in it. Accelerator hastens the curing and causes sudden temperature differences, which like a cold glass of water or tea or cola on a warm summers day, in which the temp difference draw moisture to it and sweats. Air conditioner condensers do this too. Some accelerators have water in it. Some CAs reacts to water and cures faster, and in those cases, it is a double whammy - temp differences drawing moisture into the wood and the moisture from the accelerator entering in the unsealed ends or other areas of very thin CA covering.
Sometimes it is the environmental humidity, and I noticed that you live in a naturally humid area, plus you had a tropical depression come though in the past 3 days.
There will be people who say that they do not have problems with accelerators. And that is true. Some live in very dry arid places; some seal the ends well; There are various reasons why some don't and some do.
And as John said, several have had somewhat more than the normal problems with Stickfast; but a number have not.