Group Buy for Triple Start Threads

Signed-In Members Don't See This Ad
Status
Not open for further replies.

magpens

Member
Joined
Feb 2, 2011
Messages
15,913
Location
Canada
Last edited:
Signed-In Members Don't See This Ad

wizard

Member
Joined
Aug 27, 2009
Messages
3,568
Location
Houston, Texas
Elwin,

I would like to order one each of the following:

M12.0x0.8 Plug tap
M12.0x0.8 Die

M13.0x0.8 Plug tap
M13.0x0.8 Die

M14.0x0.8 Plug tap
M14.0x0.8 Die

If above 12, I would get the three respective bottoming taps

Thanks so much,
Doc:)
 

pancho

Member
Joined
Mar 5, 2016
Messages
2
M11.0x0.8 Plug tap
M11.0x0.8 Die

M12.0x0.8 Plug tap
M12.0x0.8 Die

M14.0x0.8 Plug tap
M14.0x0.8 Die

If above 12
 

eharri446

Member
Joined
Mar 17, 2016
Messages
1,035
Location
Marietta, GA
I am also reaching out to this company to see what kind of pricing we can get for these taps:

Bock size 6 nib housings: 7.9mm x 0.6mm
Bock size 5 nib housings: 6.4mm x 0.6mm
Heritance, Schmidt & Jowo #5 fountain pen nib housings: 6.5mm x 0.5mm

Once I get a price quote I will inform everyone of what it would be.
 

eharri446

Member
Joined
Mar 17, 2016
Messages
1,035
Location
Marietta, GA
Just so everyone is aware of what is going on, I asked the vendor if we could mix and match the taps by size to meet the required quantities, and they said that we could not that is why I am showing them separately.
 

leehljp

Member Liaison
Joined
Feb 6, 2005
Messages
9,314
Location
Tunica, Mississippi,
When is your projected cut off date for taking orders?

Not intending to hurry this up, although I know some folks may could use them yesterday, it has been my observations that it takes an average of two to three weeks for this type of post to be seen and responded to - by all who are really interested.

My real purpose is to see if we have time to wait few more days and see if we can make those 11's into 12's, or jump the 5s up to at least a 6. Still it would be questionable for me at the price for 6. The prices for 12 are much more reasonable for me
 
Last edited:

GSteer

Member
Joined
Apr 9, 2015
Messages
8
Location
Cumbria, UK
I am also reaching out to this company to see what kind of pricing we can get for these taps:

Bock size 6 nib housings: 7.9mm x 0.6mm
Bock size 5 nib housings: 6.4mm x 0.6mm
Heritance, Schmidt & Jowo #5 fountain pen nib housings: 6.5mm x 0.5mm

Once I get a price quote I will inform everyone of what it would be.

Any reason you're not getting a price on the JoWo #6 taps (JoWo 7.4 x 0.5) Elwin?

I understand they are available from SilverPenParts but thought it would maybe one to include?

Count me in for a set of M13 taps/die at a final quantity of >6. I'm looking at the finances for the M12/14's.
 

eharri446

Member
Joined
Mar 17, 2016
Messages
1,035
Location
Marietta, GA
The reason that I did not include the Jowo #6 taps were that I did not have that information. Now that I do, I will asked about that size also.

The timeline for these items from the original post is 3-5 weeks depending on quantity; dies in 4 – 6 weeks depending on quantity from when the order is placed. The price quote is good until 7/31/2017.
 

stuckinohio

Member
Joined
May 3, 2015
Messages
1,695
Location
Columbus Ohio
I am also reaching out to this company to see what kind of pricing we can get for these taps:

Bock size 6 nib housings: 7.9mm x 0.6mm
Bock size 5 nib housings: 6.4mm x 0.6mm
Heritance, Schmidt & Jowo #5 fountain pen nib housings: 6.5mm x 0.5mm

Once I get a price quote I will inform everyone of what it would be.

I am in for a Bock #6 and a Jowo #6 if we get to 12 each also.
 

eharri446

Member
Joined
Mar 17, 2016
Messages
1,035
Location
Marietta, GA
At this time, I do not know if we can get a good deal on them. I hope to have that information tomorrow.

I will keep everyone informed.
 

eharri446

Member
Joined
Mar 17, 2016
Messages
1,035
Location
Marietta, GA
Here is the pricing for the first three taps for the Bock #5 and #6, and the other #5:

M 7.9x0.6 single start tap(s) as described above PLUG:
1 pc $97.60; 2 pc $72.30 each; 3-4 pc $53.90; 5-9 pc $35.50 each; 10 plus $21.60 each
M 7.9x0.6 single start tap(s) as described above BOTTOMING:
1 pc $97.60; 2 pc $72.30 each; 3-4 pc $53.90; 5-9 pc $35.50 each; 10 plus $21.60 each

M 6.4x0.6 single start tap(s) as described above PLUG:
1 pc $104.50; 2 pc $75.75 each; 3-4 pc $57.40 each; 5-9 pc $39.00 each ; 10 plus $23.80 each
M 6.4x0.6 single start tap(s) as described above BOTTOMING:
1 pc $104.50; 2 pc $75.75 each; 3-4 pc $57.40 each; 5-9 pc $39.00 each ; 10 plus $23.80 each

M 6.5x0.5 single start tap(s) as described above PLUG:
1 pc $103.50; 2 pc $74.75 each; 3-4 pc $56.40 each; 5-9 pc $36.80 each ; 10 plus $22.60 each
M 6.5x0.5 single start tap(s) as described above BOTTOMING:
1 pc $103.50; 2 pc $74.75 each; 3-4 pc $56.40 each; 5-9 pc $36.80 each ; 10 plus $22.60 each


I have gotten an answer back on the tap for the Jowo #6 yet.
 

stuckinohio

Member
Joined
May 3, 2015
Messages
1,695
Location
Columbus Ohio
Elwin,

Not sure about anyone else, but I don't know if it's neccessary to have a group buy for the Jowo #6 unless we were to hit the 10+ mark since Silver pen parts sells them at a reasonable price of $32, plus we would be supporting him. Problem is that he only has a limited amount I suppose.
 

RobS

Member
Joined
Jun 20, 2016
Messages
1,037
Location
Carlsbad, CA
I'm in for Bock 5 and 6 if we hit 12.
I already bought the Jowo from Silver pen parts.
Damn, better go sell something to cover my spending habit.
 

eharri446

Member
Joined
Mar 17, 2016
Messages
1,035
Location
Marietta, GA
Here is the price breakdown for the Jowo #6 nib:

M 7.4x0.5 single start tap(s) as described above PLUG:
1 pc $108.90; 2 pc $77.60 each; 3-4 pc $59.80 each; 5-9 pc $42.40 each ; 10 plus $25.30 each
M 7.4x0.5 single start tap(s) as described above BOTTOMING:
1 pc $108.90; 2 pc $77.60 each; 3-4 pc $59.80 each; 5-9 pc $42.40 each ; 10 plus $25.30 each
 

Cmiles1985

Member
Joined
Nov 12, 2013
Messages
1,611
Location
Aransas Pass, TX
Cmiles1985,

Do you mean you want one each of the M14, M13, M12, and M11 taps (2) and dies?

I definitely worded that wrong. I meant the feed dies!

One each of Bock #5, #6 and Jowo #5, #6 taps (depending on price point) plus my M11 die and plug and bottom taps.
 
Last edited:

Skeleton2014

Member
Joined
Jan 24, 2013
Messages
497
Location
Lynnwood, WA. USA
If we get to 10+ price, I would go for Bock #5 & #6 and Jowo #5 & #6 (plug and bottom taps) in addition to my previous post for M12/M14 taps and dies.
Jeff
 

eharri446

Member
Joined
Mar 17, 2016
Messages
1,035
Location
Marietta, GA
Dan, can you be more specific as to what you are wanting to order. All of the triple lead tap and die prices are on the first page and the prices for the #5 & 6 Bock, and #5 Jowo are on either page 5 or 6, and the price for the #6 Jowo are on this page.

On page 6 there is a current standing for the triple lead tap and die quantities. I have not gotten a count of the Bock and Jowo taps put together yet.
 

KCW

Member
Joined
Dec 18, 2014
Messages
382
Location
Lincoln, NE
Dan, can you be more specific as to what you are wanting to order. All of the triple lead tap and die prices are on the first page and the prices for the #5 & 6 Bock, and #5 Jowo are on either page 5 or 6, and the price for the #6 Jowo are on this page.

On page 6 there is a current standing for the triple lead tap and die quantities. I have not gotten a count of the Bock and Jowo taps put together yet.

Sorry Elwin, I already posted about the triple starts, but I would be interested in the Jowo #5 and #6 taps, and possibly the Bock 5 and 6, depending on how this whole thing goes down. Thank you for doing all of this for the group, I'm sure everyone appreciates it as much as I do.
 

eharri446

Member
Joined
Mar 17, 2016
Messages
1,035
Location
Marietta, GA
I will be out of town for the unforeseeable future due to the death of my brother. I have to go take care of all of the arrangements for him. I will try to get an update posted when I can.
 

Monty

Group Buy Coordinator
Joined
Mar 4, 2005
Messages
8,343
Location
Pearland, Texas, USA.
My deepest sympathy to you and your family. I will keep you in my thoughts and prayers. I know everyone will understand about the situation.
 

Ivan Campos

Member
Joined
Dec 26, 2009
Messages
2
Location
TatuĂ­, SP, Brazil
First things first, my firend. I will be ready to order when you get back to this project.
And, just to register my order is for four tap sizes (PLUG only), the four corresponding dies and the 5 and 6 Bock taps (PLUG only) if they get tothe 10+ price.
Once again, thaks for your efforst and all the best to you and yours in this sad moment.
 

eharri446

Member
Joined
Mar 17, 2016
Messages
1,035
Location
Marietta, GA
It appears that we will be go for this group buy. I will be sending everyone a PM with a spreadsheet to fill out with what they want to order. In the meantime, here is where we are at with the quantities:
View in Gallery

It appears that for most of the taps we are in the 12 to 23 range (m14, m13, & m12) and the same for the dies as well.

The M11 tap and die set are in the 6 to 11 range.

For the Bock and Jowo taps we are short of the 10+ to get the lowest price.
 
Last edited:
Signed-In Members Don't See This Ad

Treebiker

Member
Joined
Jun 10, 2016
Messages
2
Location
USA
I'm not sure what I'll get (just noticed it) but I'll add to the order. Please send the spread sheet. Thanks, Kelland
 
Status
Not open for further replies.
Top Bottom