Gridfinity Generators - What Do You Use?

[d_bondi]

Hello,

Gridfinity is an organization system that you 3D print. You can use the available predesigned items, design your own from scratch, or use one of the many Gridfinity Generators.

I'd like to know your opinions on Gridfinity Generators you have used, which ones you liked, which ones you didn't like, and why.

I am about to jump in and figured I'd "Poll the Audience" first.

Thank you in advance!!

David

 

[Leonardo]

I've tried a bunch of the online generators and have found them somewhat limited in usefulness. I ultimately landed on the Gridfinity add-on for Fusion, and of course printing the occasional pre-made model (sometimes with small modifications to dial things in).

 

[d_bondi]

I've tried a bunch of the online generators and have found them somewhat limited in usefulness. I ultimately landed on the Gridfinity add-on for Fusion, and of course printing the occasional pre-made model (sometimes with small modifications to dial things in).

Thanks Leonardo! I didn't even think of that, and I'm pretty sure you have mentioned it to me in a prior conversation.

 

[SabertoothBunny]

I use this system from MakerWorld to generate EXACT grids every single time assuming I get the measurements right. Open it in the the customize, input you length/width and it will generate a grid to fit the space and when it is imported to studio it is separated into print plates you can print independently or combine when desired and possible.

No skill or learning required. Very simple generator that has been service me VERY well. I've been using rolls of filament that are low and not worth using for anything else because the grid doesn't have to be pretty and mismatched colors don't matter. Check it out, this may solve all you dilemmas.

https://makerworld.com/en/models/704997-grips-gridfinity-interlocking-baseplate-system#profileId-634873