How I Glue Corian
I have access to alot of 1/2" Staron solid surface material. Should the pen blank glue-up be shiny side to shiny side or dull side to dull side. I found some instruction on the internet but it did not clearly answer this question for me. I am interested in minimizing any visible seam. Thanks for any help.
I have had success with Corian as follows.
1. Clean shiny sides with denatured alcohol.
2. Apply medium ca glue to shiny side of one blank.
3. Rub other side shiny side to shiny side to evenly coat both blanks.
4. Clamps as may clamps as possible - i.e. right next to each other.
5. Allow to set overnight.
6. Cut blank a little long.
7. Drill blank for tube and do not drill all the way through
(I have split the blank when drilling all the way through)
8. Cut the blank open on tablesaw.
9. Glue tube in - square - turn - finish