Gordon
Member
Trying my hand at a CA finish - but the CA is gluing my blank to the bushing.
Any tips or tricks would be appreciated.
Any tips or tricks would be appreciated.
Originally posted by byounghusband
<br />I just slide the blank to the end of the mandrel until just the bushing is on the shaft and a little downward pressure pops the bushing right off the blank. Has worker EVERY time. I learned this from Bill Baumbeck at Arizona Silhouette.
Originally posted by Dario
<br />Originally posted by byounghusband
<br />I just slide the blank to the end of the mandrel until just the bushing is on the shaft and a little downward pressure pops the bushing right off the blank. Has worker EVERY time. I learned this from Bill Baumbeck at Arizona Silhouette.
Works well but if you build up CA as finish...there is a chance that you may have an area that will feel off on the pen (sometimes just enough to create a white area underneath). A very bad feeling will follow and bad words may also be said.