Roy, it comes with ALOT. An A2Z QCTP with about 6 regular tool holders, a parting tool holder and a boring bar holder. I just put all new TIMKEN bearings in the headstock and replaced all the gears, I'll send you all the used gears so you'll have a complete spare set. Also, all the special tools I made for pulling gears in the headstock.
It comes with 4",5" and 6" 3 jaw chucks and a 4" independent 4 jaw chuck.
I'll also send you the 1/2" drill chuck for the tailstock and the special handle I had made that fits in the back of the spindle so you can turn it by hand for threading.
Also all the material I printed out about all the mods I did and of course the change gears and a binder with a complete owners manual.
Oh yeah, the two piece cabinet stand, the green one from Grizzly...real nice!
Is that enough?:biggrin::biggrin::biggrin:
I'm hoping that slow boat from China speeds up a little but I have no control over that.:wink: