Fresh meat from the midwest

Signed-In Members Don't See This Ad
UnStable Sanity

UnStable Sanity

Member
Joined
Aug 6, 2024
Messages
7
Location
US, Iowa
Hi there, the names JB.

I was inspired by a gentleman named Tom Potter way back in the day when he presented me with a turned pen he created. I was mesmerized by the chatoyancy of the pen. Ever since that day I've always wanted to get into wood turning.

Roughly ten years later I inherited a lathe in 2023 and began my journey in turning woods and acrylics. I enjoy turning woods with high chatoyancy to stay true to what inspired me. My favorite woods to work with are African Mahogany, Figured Maple, and Bubinga. I love using those three wood together in projects as they compliment each other. I've attached pics of some of my work over the year for your viewing pleasure.

I've joined IAP to acquire tips and tricks and to just enjoy conversations with fellow turners.
 

Attachments

  • IMG_8095.jpeg
    IMG_8095.jpeg
    249.2 KB · Views: 112
  • IMG_6502.jpeg
    IMG_6502.jpeg
    229.8 KB · Views: 99
  • IMG_8074.jpeg
    IMG_8074.jpeg
    434.6 KB · Views: 92
  • IMG_6499.jpeg
    IMG_6499.jpeg
    205.7 KB · Views: 99
  • IMG_6497.jpeg
    IMG_6497.jpeg
    258.6 KB · Views: 94
  • IMG_6308.jpeg
    IMG_6308.jpeg
    332.4 KB · Views: 96
  • IMG_6301.jpeg
    IMG_6301.jpeg
    315 KB · Views: 90
  • IMG_6180.jpeg
    IMG_6180.jpeg
    326.3 KB · Views: 89
  • IMG_6300.jpeg
    IMG_6300.jpeg
    189.6 KB · Views: 85
  • IMG_6358.jpeg
    IMG_6358.jpeg
    198.4 KB · Views: 92
  • IMG_8072.jpeg
    IMG_8072.jpeg
    425.5 KB · Views: 102
Last edited:
Signed-In Members Don't See This Ad
UnStable Sanity said:
You definitely have a talent for blank design. Any plans on producing more of the 3D spider web in purple? Never turned a 3D printed blank, is that similar to acrylics?
Click to expand...
Thanks, yes, I'm currently in the process of making more. Yes, they are mostly urethane resin and turn pretty easily. I always suggest applying a good layer of CA as a finish because the printed areas on all 3D blanks react to humidity and you will eventually feel them raise a tad bit on the surface.
 
You must log in or register to reply here.
Back
Top Bottom