drewdin
Member
I am getting ready to make my fist pen today and I am still unsure about the finishing process. I read a ton of posts already and I think I am going to follow the steps below. I have seen some people recommend using pastewax after the one step polish, what does that actually do?
1. sand up to 1000 or so
2. walnut or linseed oil (optional)
3. friction polish (I have some mylands)
4. CA 3+ coats
5. sand with MM
6. apply one step or similar plastic polish
7. apply Johnson or similar paste wax
Am I missing something or if there are any suggestions or recommendations I would greatly appreciate it!
1. sand up to 1000 or so
2. walnut or linseed oil (optional)
3. friction polish (I have some mylands)
4. CA 3+ coats
5. sand with MM
6. apply one step or similar plastic polish
7. apply Johnson or similar paste wax
Am I missing something or if there are any suggestions or recommendations I would greatly appreciate it!