Emperors bigger than the HAVANA ??

Signed-In Members Don't See This Ad
Status
Not open for further replies.
Signed-In Members Don't See This Ad
The Havana FP & RB both use 35/64 and 31/64 bits. CS instructions recommend 7/8 x 4 blank for the fountain and 7/8 x 5 1/2 blank for the rollerball. I have the kits but haven't made them yet.
 
Th e comparison get a little complicated, the emporer has a straight onle form bushing to bushing. The bushings are the same size for each end of each barrel for both the upper and lower barrel. the Havana tapers for both barrels, The bushings are smaller at one end of each barrel.
So my comparison is against the largest diameter of the Havana upper and lower barrels.
the Emperor cap is the same diameter but longer than the Havana.
the lower barrel is larger in diameter by a fair bit and very close to the same length.
 
Status
Not open for further replies.
Back
Top Bottom