Elmers Ultimate Glue

Signed-In Members Don't See This Ad
Status
Not open for further replies.

Fearless

Member
Joined
May 12, 2004
Messages
33
Location
Flagstaff, Az, USA.
Hello all.
This is a polyurethane glue that I saw at the borg that is stocked right next to the Gorilla glue, so I assume it is probably pretty much the same thing. The catch is that it's listed at almost $3 cheaper than the Gorilla.(4 oz. bottle)
Anyone have any experience with this product good or bad?
The reason I ask is I have had a couple of blow-ups due to lack of sufficient glue coverage with my thick CA and was thinking something else might be in order.And like I'm sure most of us do, if I can save a couple bucks, more the better.
TIA
Scott
 
Signed-In Members Don't See This Ad
I have used several different brands of poly glue and have not found one to be better than the other. I use epoxy glue most of the time and have not had any glue failure with it. I no longer use CA for glueing brass as I had lots of problems with blow outs and the glue being to brittle. Just my 2 pennys
 
Works ok for me. I let it set up overnight and turn the next day. The only problem that I have is getting in the habit of applying moisture to one side or the other to activate the glue.
 
Thanks all!
Pretty much the way I suspected It to be.
Think I'll give some a whirl.(ha ha)

Welcome to the neighborhood laspringer and thanks for the input.
I believe that I saw mention here that some of the folks simply breathe into the blank to wet the stock prior to inserting the tube.
Lots of great folks here as well as a huge amount of info.

Thanks again to all.
Scott
 
Status
Not open for further replies.
Back
Top Bottom