Corian

[kludge77]

Is 1/2 as thick as it comes or am I just looking in the wrong places?

 

[TBCbushings]

All mine are half inch. I glue 2 pieces together to make 1 inch. I have not seen it in any other thickness other than 1/2 inch. I glue the smooth sides together after I cut them to width....Hope this helps.
Brian

 

[AceMrFixIt]

The sheets made for countertops are only 1/2 inch. They are glued together to make it look thicker.

 

[alphageek]

There is some sources for thicker stuff... but it is much more $$$$. Most of us just glue it up.

 

[Mark]

I do the same. All that I've purchased recently is cut to 1/2"

When I first joined here, someone was selling White, Gray and Black. That stock was all 3/4", but I haven't seen that recently.

 

[kludge77]

Thanks! I'll stop looking...

 

[Smitty37]

3/4 out there

Thanks! I'll stop looking...

There is a source for 3/4 corian but it is very limited in selections and a lot more expensive than 1/2 inch which is practically given away.

 

[Mark]

I'd be interested in hearing more......

 

[Frank Nemke sr]

I have about 300 lb's of 1/2 " and 1 3x5 pc. of 1 " All traded for at a local cab. shop. If you glue pc's together, scuff them up first

 

[Gulfcoast]

--- here is the site for the "Corian Book", a pdf produced by Dupont.

--- everything you wanted to know about "Corian" in one place.

--- I reduced it to a "tiny url" to make it more user friendly.

http://tinyurl.com/25q3n6s

Joe