Dale Lynch
Member
Hey turners,over xmas I made some shaving brushes for the guys I work with.One of them has a brother who liked it and wanted one for himself.My coworker asked me how much so I told him $75 on up depending on size and materials.He gave me $100 and this is what I turned.
Orange and black mix polyester resin fitted with 26mm 2-band badger.
.
Drilled,turned, and sanded thru 1500g.Buffed it out with PBC and again with a clean soft buff.Also applied some ren.wax.
Orange and black mix polyester resin fitted with 26mm 2-band badger.
.
Drilled,turned, and sanded thru 1500g.Buffed it out with PBC and again with a clean soft buff.Also applied some ren.wax.