cleaning delron bushings

[sgimbel]

Can I clean delron bushing by soaking them in acetone without destroying them? If not how do I clean CA buildup off them? Thanks in advance.

 

[hewunch]

Yes. You can.

 

[johnnycnc]

Can I clean delron bushing by soaking them in acetone without destroying them? If not how do I clean CA buildup off them? Thanks in advance.

You sure can. I have tested it and there are no issues.
After you get them clean, I recommend mounting them with a blank tube
so you can access them and using 1000 or 1500 grit wet-dry auto paper and perhaps ren-wax as a lubricant to sand with. buff off lightly when done .
this is a big help in making them a bit more stick resistant, as it polishes the surface a bit and the wax helps some too.

John

 

[sgimbel]

Thanks John there your bushings.

 

[CharlesH]

I usually just cut the glue excess with a skew and when the bushings are worn off I just but new ones from my friend Johnny! ;-)

C

Sent from my Samsung Galaxy S2.