larryc
Member
Does any one else have a problem with Cigar tubes not fitting in the drilled blank?
It doesn't matter whether I drill with a 10mm or a 25/64" drill (both measure the same) the tubes do not fit properly. I know it's not my drilling method because I drill everything on the lathe and I don't have this problem with any other kit.
The Cigar drill is .2 mm larger than the Cigar tube while the Sierra drill is .25 mm larger than the Sierra tube and I have never had a problem with the Sierra.
It doesn't matter whether I drill with a 10mm or a 25/64" drill (both measure the same) the tubes do not fit properly. I know it's not my drilling method because I drill everything on the lathe and I don't have this problem with any other kit.
The Cigar drill is .2 mm larger than the Cigar tube while the Sierra drill is .25 mm larger than the Sierra tube and I have never had a problem with the Sierra.