Curly
Member
This is a swap pen I made for Ernie Borraga on another forum. Barrel and cap are cebloplast with the section of black acrylic. Nib is a Schmidt #5, fine point I think. I picked that nib and section because it can be unscrewed and replaced with a Schmidt rollerball tip. I Gave Ernie one along with a cartridge converter and a package of Private Reserve cartridges. As this is my 6th kitless it doesn't have a clip,,,,,,, but #7 will. :wink: Sanded to 400 or 600 grit, 0000 steel wool and then buffed with the Beall system. Capped the pen is approximately 15cm, uncapped 13cm, weight 19 grams with empty converter, and the barrel to cap thread is a 12mm triple start.
Critique is welcomed.
Pete
Critique is welcomed.
Pete