GregMuller
Member
Does anyone who uses Enduro use CA as a sanding sealer. I find that with open pore woods such as Walnut I am finishing the process with open pores. Would a CA slurry prior to the Enduro sealer solve this problem?
CA with Enduro
- Thread starter GregMuller
- Start date
Signed-In Members Don't See This Ad
- Status
Texatdurango
Member
Just curious, but if you are going to seal up the pen with CA, why not just put on a few more coats....... then you have a nice CA finish?
wdcav1952
Activities Manager Emeritus
Greg,
Yes, CA works fine under Enduro. I always let it cure overnight just to be sure it is fully cured. I have also used BLO under an Enduro or Unaxol finish, but I set it aside for a couple of days, probably just to ease my own mind.
Yes, CA works fine under Enduro. I always let it cure overnight just to be sure it is fully cured. I have also used BLO under an Enduro or Unaxol finish, but I set it aside for a couple of days, probably just to ease my own mind.
Ligget
Member
I`m with Cav on this one
]
]- Status