Do you ever have problems with CA taking the finish off of your hardware or pen? When I need to glue on a center band like on a European pen I use 2 part 5 min epoxy by Devcon. I find it at Sears in the glue section. What is nice about this is, as long as you wipe any excess glue off before it drys, it comes completely off of the hardware without damanging the finish! I just use a dry paper towel to get the large amount off and another wipe of the dry paper towel in a clean spot. Make sure it is completly off.I also have had NO problem on acrylic or corian with it, taking the finish off! Of course, like any glue if you let it dry on the finish you will probably have problems. I use Deft gloss spray on all of my wood and I have never had a problem with the finish coming off if the epoxy touches it. I just wipe it off promptly!
Please note I do not use friction polishes or waxes . I do not know how it would react to finishes on wood other than deft spray gloss
Please note I do not use friction polishes or waxes . I do not know how it would react to finishes on wood other than deft spray gloss