David350
Member
Just when I think I have it figured out, I have another CA finish problem. This problem is that I get small, maybe small, irregular pea-sized or so areas, usually only one or maybe 2 spots where the CA finish looks as if the color of the wood is bleached underneath it. Is this an artifact of applying too much activator? I use the stickfast thin for 5 coats, then the medium for 5 coats, then a couple more thin just to fill in any medium voids. I usually pulse 4 to 5 shots of the activator in between coats. I then wet sand with the micro pads, 800 to 12,000. Thanks in advance for any suggestions. David