ToddMR
Member
This is my first time turning palm at all. This is a piece of black palm I got in the pith trade. The kit is a gold/gun metal click cigar. I went ahead and for kicks, made the body as straight as I could. This time I did not bow the middle out like I normally do. I have to admit, I like it. Turning the palm didn't seem difficult at all to me. I used a scrapper and my skew for the most part. I did 2 coats thin and 6 coats med ca. I then did my wet MM from 1200-12000. I do see some swirls in my finish on the lower barrel. When I first got the pen together the click plunger kept sticking. I then took a file to the plastic inside the finial and that solved the issue. Let me know what you all think overall.