JosephDurham
Member
- Joined
- Sep 17, 2012
- Messages
- 33
Can you use the Beall buffing system on an acrylic? I guess I should also say that the buffiing pads on the buffing system are new.
Thank you,
Joseph
Thank you,
Joseph
I recently watched a video by Barry Gross. He used the buffing system using Tripoli and White Diamond. Haven't tried it personally.
Kevin
How far are you wet sanding before Buffing? someone mentioned wet sanding to 400, but that seems low to me.
What "grit" is buffing compared to Micromesh? It seems to me that buffing after Micrmesh to 12000 reduces the finish I received with just the Micromesh?
How far are you wet sanding before Buffing? someone mentioned wet sanding to 400, but that seems low to me.
What "girt" is buffing compared to Micromesh? It seems to me that buffing after Micrmesh to 12000 reduces the finish I received with just the Micromesh?
So, here is a question than, and since I am new to buffing I apologize for my ignorance. I have been turning for over ten ears and never used a buffer system.
-what is the purpose of micromeshing if your only sanding to around 600 grit
- if one is capable of getting a high gloss shine by sanding,why use the buffing system
Thanks,
Joseph