Barrel Trimmer Sleeves

[kooster]

Does anyone know if there is a source for purchasing barrel trimmer sleeves in sets or a good selection of individual one? I know these can be made but I'd prefer to purchase commercial varities. Thanks for any leads, links, or references.

 

[bgio13]

Although they seem to be out of stock on some sizes, exoticblanks.com is where I buy mine. Hope this helps,

Bill

 

[eliasbboy]

Craft Supplies carries them as well.

 

[walshjp17]

PSI also has them. One thing I have noticed, though, is no one sells them in multiple kit sets, only as individual kit sleeves. The reason is likely that there are just too many tube sizes for anyone to make an affordable set.

I am making my sleeves from PVC blanks for each of the tube sizes I use. There is a good video on Wooden-N-Whimsies web site on how to make a barrel trimming sleeve. Videos | Page 1 of 1. Scroll to the bottom of the page.

 

[jttheclockman]

PSI also has them. One thing I have noticed, though, is no one sells them in multiple kit sets, only as individual kit sleeves. The reason is likely that there are just too many tube sizes for anyone to make an affordable set.

I am making my sleeves from PVC blanks for each of the tube sizes I use. There is a good video on Wooden-N-Whimsies web site on how to make a barrel trimming sleeve. Videos | Page 1 of 1. Scroll to the bottom of the page.

There is alot of good videos there also.

 

[BSea]

Anyone who pours their own blanks probably has a few blanks that don't make the cut. I use those for making sleeves. They are also good if you use a sanding trimmer from Rick Herrell.

 

[kooster]

Thank you sirs for all the responses.

 

[Scruffy]

I think Whitside has .

a Pen Mill Set. with 4 or 5 different size tube cleraners.

Maybe Woodcraft carries them.

 

[CrimsonKeel]

a Pen Mill Set. with 4 or 5 different size tube cleraners.

Maybe Woodcraft carries them.

i bought a multisize set of pen mills from woodturningz.com .