Does anyone have a good method, or better yet, a jig for sharpening barrel trimmers?
J jlfortiner Member Joined Dec 23, 2004 Messages 1 Location Billings, Montana, USA. Dec 23, 2004 #1 Does anyone have a good method, or better yet, a jig for sharpening barrel trimmers?
Randy_ Member Joined Nov 29, 2004 Messages 5,701 Location Dallas suburb, Texas, USA. Dec 23, 2004 #2 There has been a post on this subject recently. Check out the search function and you should be able to find it without too much trouble. You can do it by hand without a jig. All you need is a small diamond sharpener.
There has been a post on this subject recently. Check out the search function and you should be able to find it without too much trouble. You can do it by hand without a jig. All you need is a small diamond sharpener.
D dougle40 Member Joined Nov 13, 2004 Messages 1,423 Location Essex, Ontario, Canada. Dec 24, 2004 #3 I use a 1/4" drum sander on a Dremel tool for the cutting edge and just touch up the side flats with a small stone .
I use a 1/4" drum sander on a Dremel tool for the cutting edge and just touch up the side flats with a small stone .