baron nibs

Signed-In Members Don't See This Ad
sparhawk

sparhawk

Member
Joined
Jun 22, 2007
Messages
1,404
Location
Rosinton, Alabama, USA.
Have any of you bought the replacement nibs from a.s. for the baron? I was wanting to try some things with the nib sections and grip but when i looked at the picture on a.s. the nib section looks like it is minus the grip part. Just the feed section and nib.
 
Signed-In Members Don't See This Ad
I haven't bought one, but you are correct. The section is not included. All you need to do is unscrew the old nib and screw in the new one.

jeff
 
If you wanted to modify some nib jackets for the Baron, I would order either the BHW-706, BHW-707, BHW-708, which are also shown on the A/S page.

I am not constrained by the kit female threaded part so make the entire housing including new threads but you can do something similar and still use your stock male threads. I have a photo in my album that shows one way that I modify my nib holders, it might give you some ideas.

http://www.penturners.org/forum/photo_album_view.asp?cname=Tools and ideas&mid=3891&cid=5052
 
Get in touch with DCBluesman here on the forum. I have ordered nibs from him. He is very informative when it comes to fountain pens he helped me alot and his products are second to none.
 
Thanks Tex ,that was what i was thinking about but didnt want to screw up a pen doin it and then not be able to replace it if the nib kit was different. Thanks for the help.
 
Ok, are we saying that threads on this part

200841674625_feed.jpg

on the baron and the CSU item are the same?
 
Originally posted by Chuck Key

Ok, are we saying that threads on this part

200841674625_feed.jpg

on the baron and the CSU item are the same?
Click to expand...
I wouldn't know about the small threads on the feed housing since I have never purchased a Baron fountain pen to compare. The threads on the outer jacket are the same though... OR at least close enough that the Craft Supply nib holders thread nicely into a Baron lower body.

I have modified the jackets of several $4.50 replacement holders from Craft Supply and they thread right onto a Baron body. I would bet that one could take the replacement holders A/S sells, that I mentioned in an earlier post, and screw them right into Jr Gent bodies as well!
 
You can take the black plastic housing pictured, including the feed and nib if desired, from a Baron and put it in the metal section for the Jr. Gent II and vice versa. The parts are slightly different, but the threading is the same. More clear?
 
Originally posted by DCBluesman

You can take the black plastic housing pictured, including the feed and nib if desired, from a Baron and put it in the metal section for the Jr. Gent II and vice versa. The parts are slightly different, but the threading is the same. More clear?
Click to expand...

Yes, very clear and greatly appreciated. Thank you.
 
You must log in or register to reply here.
Back
Top Bottom