:biggrin: LOL, you're either gonna love this one or absolutely detest it.
But just for a bit of fun..........
Below is a pic of ALL the parts, in fact 3 bits of these parts won't be used.
There are 2 x 316 Stainless Steel arc welding rods, 2 x 6mm S/S Dome nuts, 2 x S/S 6mm bolts, 2 x S/S 6mm nuts, Slimline refill, 1/2 a spring
The only tools that are used are
1. Drill press
2. Vice
3. Hammer
4. Pliers
5. 6mm tap and wrench
6. Hacksaw
7. Sandpaper
The bits not used will be the bolt heads and the blue plastic part of the refill. The refill will retract.
I'll let your imagination run wild for a bit, then post what I came up with. See if you have the same daft streak in you as me:biggrin:
But just for a bit of fun..........
Below is a pic of ALL the parts, in fact 3 bits of these parts won't be used.
There are 2 x 316 Stainless Steel arc welding rods, 2 x 6mm S/S Dome nuts, 2 x S/S 6mm bolts, 2 x S/S 6mm nuts, Slimline refill, 1/2 a spring
The only tools that are used are
1. Drill press
2. Vice
3. Hammer
4. Pliers
5. 6mm tap and wrench
6. Hacksaw
7. Sandpaper
The bits not used will be the bolt heads and the blue plastic part of the refill. The refill will retract.
I'll let your imagination run wild for a bit, then post what I came up with. See if you have the same daft streak in you as me:biggrin: