Paul in OKC
Member
Found these at a beadery store one day. They had a hole in them big enough for a 7mm
tube. Made it for my daughter.
tube. Made it for my daughter.
At the bead store
- Thread starter Paul in OKC
- Start date
Signed-In Members Don't See This Ad
- Status
Signed-In Members Don't See This Ad
GregD
Member
Well now that's different. I'm not sure I like it, but someone will.
rtjw
Member
Good pen. If your daughter is in school allf her classmates will love it.
Tom McMillan
Member
Good idea Paul!! Gonna have to check out some of the beads---may be some potential there for other projects too!!
tipusnr
Member
An abacus pen! Great for math and english classes!! Great idea!!!
Wow--think of all the ice cream cone pens you could make with those! (And before anyone asks, yes, I've been working with CA again! [
])
])
Daniel
Member
I've seen something along the line of using beads on pens before. someone was finding metal ones that could be drilled out and used as center bands. never seen a whole pen from Beads though. did they jsut happen to come out the right length or did you have to cut the sides down a bit?
Ice Cream Cone? Hmmmm if a corn cob could be turned to a taper and still keep the figure. that might make a realistic looking cone. Hmmm maybe I'm setting to close to an open bottle of CA myself. Oh yea I'm on medication I'm exempt from anything I say.
Ice Cream Cone? Hmmmm if a corn cob could be turned to a taper and still keep the figure. that might make a realistic looking cone. Hmmm maybe I'm setting to close to an open bottle of CA myself. Oh yea I'm on medication I'm exempt from anything I say.
Ligget
Member
Excellent idea for showing prospective customers color samples. You know how the applied stain can look different from the bottle colour etc.....
WoodChucker
Member
Paul, your using your head and came up with a idea that I think would be a hit with young girls. Its not a pen I'd carry but I still like it. Thanks for sharing your idea and don't be surprised if one us runs with it. [
]
]
Paul in OKC
Member
I did this a while back. The tubes were the long lower tubes for the 7mm Euro.
Fred in NC
Member
Very different and NICE !!! Great job Paul !!!
I have done some pens with oversize top barrel. To make the clip a bit better balanced, before assembly I put the clip in a bench vise (or Panavise, if you have one) holding it by the ring by the side of the jaws. The bent part of the clip stays outside, and will stick out about 1/16". This allows me to slip the shank of a drill bit of the appropriate size between the clip and the vise, all the way up to the ring. For this I have to pull the clip outwards a bit. Then I push the clip back to bend it at the top. Now the clip sticks out from the top of the pen a little more and is more parallel to the pen. Looks better and works better in a shirt.
If I get a chance I will take a pic and post it. If anybody tries it and can take a pic, feel free.
I have done some pens with oversize top barrel. To make the clip a bit better balanced, before assembly I put the clip in a bench vise (or Panavise, if you have one) holding it by the ring by the side of the jaws. The bent part of the clip stays outside, and will stick out about 1/16". This allows me to slip the shank of a drill bit of the appropriate size between the clip and the vise, all the way up to the ring. For this I have to pull the clip outwards a bit. Then I push the clip back to bend it at the top. Now the clip sticks out from the top of the pen a little more and is more parallel to the pen. Looks better and works better in a shirt.
If I get a chance I will take a pic and post it. If anybody tries it and can take a pic, feel free.
Fleabit
Member
Different indeed. Creative...but different lol.
woodscavenger
Member
Put little wiggly eyes on it and a small set of antenae and call it a caterpillar pen!
swm6500
Member
Definitely a different breed. I would think your daughter would like it a lot.
JimGo
Member
Neat idea, very creative!
- Status