SGM Retired
Member
Need idea's for turning a pen for a friend of mine that served in the Air Force. His wife has asked me to turn one with AF colors and a decal. Does anyone have any ideas for this pen? Any help would be great. Thanks.
Air Force Pen idea
- Thread starter SGM Retired
- Start date
Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad
navycop
Member
Check this out. It is by ribanett (Larry).
http://www.inscribershoppe.com/iap_photos/iap_decal_brou.pdf
http://www.inscribershoppe.com/iap_photos/iap_decal_brou.pdf
SGM Retired
Member
I got a USMC cartridge from Larry but don't think she wants a bullet as the pen. I was thinking Cigar pen with antler lower with decal and blue acrylic upper but not sure how that would look. Has anyone seen an inlay for AF??
Florida Marine
Member
Check out Constant's page, I think he has an AF kit...
hewunch
Member
Here is one I did for a C-130 pilot. On the side I put a decal of a C-130 and under the clip I put his squadron logo.
Snowbeast
Member
just made a few pens with my first "decals" (actually just address labels from Office Depot).
Some hobby shops sell waterslide decals for model cars, or Ive seen guys recommend decalpaper.com. Then you can put them on tubes and cast in resin, or get a fairly flat surface and put right on the wood/pen material, and build up a real thick finish layer.
THese are my first two. Also made a padre pen that started with wrinkles in my sticker. between every 5 coats or so i would sand with grit to help level it out. Ended up really nice.
as far as colors i would just segment acrylic or mix up a batch with the right colors if you cast yourself.
edit: there is no consistent line of glare or shine because this was taken at night in my lap with flash only in a dark room. THere is no overhead light to show a reflection. Enough CA glue completely covers the ridges made by the stickers.
Some hobby shops sell waterslide decals for model cars, or Ive seen guys recommend decalpaper.com. Then you can put them on tubes and cast in resin, or get a fairly flat surface and put right on the wood/pen material, and build up a real thick finish layer.
THese are my first two. Also made a padre pen that started with wrinkles in my sticker. between every 5 coats or so i would sand with grit to help level it out. Ended up really nice.
as far as colors i would just segment acrylic or mix up a batch with the right colors if you cast yourself.
edit: there is no consistent line of glare or shine because this was taken at night in my lap with flash only in a dark room. THere is no overhead light to show a reflection. Enough CA glue completely covers the ridges made by the stickers.
Attachments
Last edited:
SGM Retired
Member
Thanks everyone for those ideas, that C-130 is awesome. I don't cast so I must buy the color blanks. Not sure well the decal will show with a dark blue blank, has anyone placed a white background decal on a dark color blank? The C-130 clear decal on white looks great but would like a more darker blue if it's possible. I did check with Constants but due to being trademark they don't have. Thanks everyone again for these ideas, will keep looking.
juteck
Member
What about custom clips like those at Wood Pen Pro ?
http://www.woodpenpro.com/custom_clips/index.html
Or the domed logos at Hut Products?
http://www.hutproducts.com/departments.asp?dept=138
http://www.woodpenpro.com/custom_clips/index.html
Or the domed logos at Hut Products?
http://www.hutproducts.com/departments.asp?dept=138
Last edited:
hewunch
Member
The C-130 was a white decal, as was the squadron logo. I have put white on dark before and I have played with the contrast of the print to compensate. Also, I have put clear on dark if I wanted it to look more subtle, or even like wood grain.
keithlong
Member
Hopefully this week I can be in the shop, so if i can help you let me know.
SGM Retired
Member
Did not think of the clips, thanks. As for the light on dark combo's I recon I will just have to try it out, thanks. I have clear decal sheets but have not tried yet. It's time to start printing. If there are any more ideas keep them coming.
t001xa22
Member
Like John said, the options are great using the custom clips from Wood Pen Pro. I have used them several times, and the clips are well-made. They also have combo sets that have a custom finial matched with the clip of your choice of branches of service. Please forgive the not-so-great photos; these were done before I built my lightbox.
Attachments
SGM Retired
Member
Thanks Bill, will check them out.
denniszoomy
Member
Where can you get the military decals small enough for pens? and do you do a CA Glue finish over them to try and keep them on?