maxman400
Member
First of all This was my son's Idea (about 6 months ago) but he never followed through with it so I did. :wink: This is a HF Air Nozzle and Air Chuck. I took the air nozzle apart and removed the insides. I drilled out the end to except the slim line nib, the nozzle (now the back of the pen) screws in an out to cut off the air flow. Now it moves the ink refill in and out, Screw the nozzle in and the refill comes out. I used a #5 O' ring between the nozzle and the housing to prevent it from coming all the way out. The clip is a "clip on" and comes with the nozzle. I removed the guts of the air chuck (except for the locking balls) and drilled it out so the the nib would fit inside and still lock on to the nozzle. For right now there is just a brass plug in the end of the cap.
Sorry for such a long post for such a simple pen. :redface:
Comments Welcome, Thanks for looking. :biggrin:
DARN Now I have to go to HF to buy another Air Nozzle. :wink:
Sorry for such a long post for such a simple pen. :redface:
Comments Welcome, Thanks for looking. :biggrin:
DARN Now I have to go to HF to buy another Air Nozzle. :wink: