a NOT reccomended finish

Signed-In Members Don't See This Ad
Status
Not open for further replies.

Rifleman1776

Member
Joined
Dec 18, 2004
Messages
7,330
Location
Mountain Home, Arkansas, USA.
Because I couldn't find the Deft spray in my area, I bought some Minwax Helmsman spar urethane spray finish to try on pens and duck calls. It is an indoor/outdoor finish resistant to wear and moisture. Sprays evenly and makes a fine clear, gloss finish with no further work necessary after proper sanding. Downside: takes forever to dry and cure. A duck call is still tacky after five days. To me, not acceptable. I don't reccomend.
 
Joined
Jan 27, 2005
Messages
2,372
Location
Drums, PA, USA.
Did you shake the can?

There is something wrong if it takes five days to dry. I've used the same stuff, but in a can and it's dry to the touch after five hours.
 

LanceD

Member
Joined
Oct 3, 2005
Messages
1,590
Location
Houma, La, USA.
I use Min Wax spar urethane as a coating on fishing rods and it does take several days to fully cure, up to 7-10 days. It makes a beautiful, hard finish but you have to be patient while waiting for it to cure. I don't use it on pens for that very reason.
"No patience"
 

Dario

Member
Joined
Apr 14, 2005
Messages
8,222
Location
Austin, TX, USA.
I've used Spar varnish in the past. Takes a long while to cure but once it does...you have a very nice finish...waterproof too!
 
Status
Not open for further replies.
Top Bottom