Cmiles1985
Member
Well, I got in the garage and worked hard at it this weekend...and it's only halfway through Sunday!
First is a gunmetal bolt action from Smitty in diagonal cut zebrawood:

Finish is 7 coats thin CA, 7 coats medium CA, sanded from 400 to 1000 grit paper then hit with Novus Plastic Polish.
Now a few gunmetal cigars cloaked in free walnut from a cabinet maker friend in Mexico (it's fairly straight grain on these pieces):

These are all finished with 7 coats thin CA, 7 coats medium CA then sanded and wet MM'd.
A Mesa stylus, sierra chrome and cigar click chrome all in some of my bash winnings from firewhatfire:
These are all sanded with 400, 500, 600 and 1000 grit paper then finished with all three stages of Novus Plastic Polish, and I am VERY happy with the results.
And all together:

Any and all C&C welcome. Photo quality may not be so hot, but getting the DSLR out isn't feasible very often.
First is a gunmetal bolt action from Smitty in diagonal cut zebrawood:

Finish is 7 coats thin CA, 7 coats medium CA, sanded from 400 to 1000 grit paper then hit with Novus Plastic Polish.
Now a few gunmetal cigars cloaked in free walnut from a cabinet maker friend in Mexico (it's fairly straight grain on these pieces):

These are all finished with 7 coats thin CA, 7 coats medium CA then sanded and wet MM'd.
A Mesa stylus, sierra chrome and cigar click chrome all in some of my bash winnings from firewhatfire:

These are all sanded with 400, 500, 600 and 1000 grit paper then finished with all three stages of Novus Plastic Polish, and I am VERY happy with the results.
And all together:

Any and all C&C welcome. Photo quality may not be so hot, but getting the DSLR out isn't feasible very often.