A few for our Canadian Friends

Signed-In Members Don't See This Ad
See more from Mike8850

Mike8850

Member
Joined
Jun 12, 2008
Messages
631
Location
Freeland, Michigan, USA.
These were a special order for a customer whose husband enjoys Labatt's Blue.
Blue Pics.jpg
They were made with the caps cast in PR resin.
Any questions or suggestions are welcome.
Mike
 
Signed-In Members Don't See This Ad

MJS613

Member
Joined
Oct 6, 2020
Messages
19
Location
ottawa
Those are pretty cool, would,be interested in the process of prepping the caps and pitting in blank
 

Mike8850

Member
Joined
Jun 12, 2008
Messages
631
Location
Freeland, Michigan, USA.
Those are pretty cool, would,be interested in the process of prepping the caps and pitting in blank
Thanks for the compliments.
First I cut the crimping off . Then I scrape and sand the seal off.
Next I find a transfer punch a little smaller than the tube and wrap the caps around it.
Slide the caps on to the tube and a few few drops of CA to hold them in place
I then cast with PR resin.
Mike
 

MJS613

Member
Joined
Oct 6, 2020
Messages
19
Location
ottawa
Thanks for the compliments.
First I cut the crimping off . Then I scrape and sand the seal off.
Next I find a transfer punch a little smaller than the tube and wrap the caps around it.
Slide the caps on to the tube and a few few drops of CA to hold them in place
I then cast with PR resin.
Mike
That is awesome, they really look cool. I will have to buy some beer in bottles!
 
Top Bottom