Aerotech
Member
i did some research here and found this to be a common problem but was unable to find too many solutions.
one is to clean the preservative off the transmission and lubricate with some other type of oil. i tend to agree with this but was wondering if anyone had any lessons learned from doing this.
another was to put CA glue inside the upper tube to tighten the fit of the tube. this corrected the "slipping" but obvously not the tight transmission.
Does anyone know if these transmissions will loosen up over time with normal use? Thanks for any imputs
Dale
one is to clean the preservative off the transmission and lubricate with some other type of oil. i tend to agree with this but was wondering if anyone had any lessons learned from doing this.
another was to put CA glue inside the upper tube to tighten the fit of the tube. this corrected the "slipping" but obvously not the tight transmission.
Does anyone know if these transmissions will loosen up over time with normal use? Thanks for any imputs
Dale