50 Cal 50 BMG bullets once fired brass shell & cleaned out tracer round

[bruce119]

SOLD OUT ... THANK YOU

10-sets*(1-Box) ..... $50.00 shipped (USA ONLY) I have about 10 boxes
*1-set is the Brass Shell & cleaned out Bullet**

NOTE --- I can do 5 sets for $30.00 shipped (USA)

**I will remove the incendiary and melt out the lead for safer shipping and easer handling**

These are once fired brass and pulled projectiles
They will be dirty with some scratches but clean up very nice

There is a good tutorial in the Library HERE View attachment 50BMG (1).pdf (I used the cross refill method worked great)
I had these a few years and not using them anymore

For $1.00 ea. bullet I can drill the tip with a #44 bit for a cross refill
Drilling the point is the hardest. I have a metal lathe for more precision
I will also chamfer the inside

Post if you want a box be sure to indicate if you want the bullet tip drilled or not
I will PM you with PayPal instructions

PM me with any questions I will do my best to help

 

[bruce119]

Hi everyone I did a detailed HOW-TO with lots of photos and a drawing on how I make these.

It's in the Build, Tips & Tricks Forum HERE

These are easy to make the only parts you will need is two 2" 7mm tubes and a slimline transmission.

If you have any question go ahead and ask.

I already did this


I can do this and chamfer the inside


Here is a drawing and exploded view of the components


The finished product


.

 

[Scruffy]

I'll take a box of 10

and drill them out.

 

[Fordwakeman]

I'll take a box of 10.

Please drill them for me.

 

[ALA]

I'll take a box. And drill them also.

 

[jlnel]

One box please, drilled out.

 

[bruce119]

OK Everyone is shipped except the last one will go out tomorrow
THANKS​

I have 4 maybe 5 boxes left
Hurry​

I do most of the hard work
These are easy to make
If you need help or have questions ask​

thanks

 

[Jim Smith]

Bruce,

The shells and bullets arrived today in great shape. Thanks again for this very generous offer.

Jim Smith

 

[rsjimenez]

I will take a box drilled.

 

[JDennis]

I will take a box also drilled. Send me paypal info and I will make payment ASAP.

 

[Balasharc]

I would like a box, please send paypal info.
Also please drill out

 

[bruce119]

UPDATE​

everyone is paid & shipped to this point​

ONLY 2 BOXES LEFT
!!!HURRY!!!​

.​

 

[LagniappeRob]

Will take a box drilled please.

 

[bruce119]

ONE BOX LEFT​

HURRY​

these are not hard to make
just takes two 7 mm tubes and transmission
and a little work sanding and polishing​

I have a picture tutorial HERE step by step
you can always ask me
I will do my best to help​

thanks

 

[hchidgey]

I will take the last one.

Thanks,
Henry

 

[hchidgey]

Drilled please!

 

[bruce119]

OK

these are all gone now

Thank you everyone​

.​