3 from yesterday

Signed-In Members Don't See This Ad
See more from DB in VT

DB in VT

Member
Joined
Oct 13, 2016
Messages
143
Location
Vermont
As is my usual Sunday afternoon during the cold weather months, I spent some time in my shop.
The Pensar is a new kit to me. It is from Woodcraft. I used canary wood cut at a 30 degree angle. It's rather striking in its own way.
The RAW is paired up with a piece of spalted maple that makes it look like a jaguar pen.
The Baron is paired with a piece of curly ash from a neighbor's tree that was cut this past summer.
All are finished with with 1 thin coat of CA and 10 coats of medium, sanded to 320 then micro mesh to 12000 and finally polished with 1 step polish.
Photography is not my forte but comments and criticisms are still welcome.
 

Attachments

  • Pensar.JPG
    Pensar.JPG
    128.7 KB · Views: 266
  • RAW.JPG
    RAW.JPG
    136.4 KB · Views: 294
  • Baron.JPG
    Baron.JPG
    114.5 KB · Views: 296
Signed-In Members Don't See This Ad
Very nice, really liking the ash, not a wood we see often in pens. I saw the Pensar down at Woodcraft this weekend, haven't warmed up to it... btw, what kit is the "RAW"? 'Tis not an acronym I can puzzle out.
 
Great Pens Dennis,
Excellent Selection and matching Blanks to Hardware.
Beautifully Turned, Fitted and Finished.
Outstanding,
Congratulations,
Brian.
 
You made ash look really, really, good. That isn't easy. It is about the most unremarkable wood I have ever seen. Great job.
 
Back
Top Bottom