2500s

[fisher]

I got some today and used it .It turned out i was going to fast putting it on the barrel's.So i slowed down with the application and it worked beautiful.
Right or wrong it worked real well,Im satisfied with the new ca 2500s.

I had to sand down twice to figure this out .

Is there a better way to apply 2500s glue?

I had the lathe running at 1200 rpm also.Is there a secret rpm number to apply the 2500s glue?

 

[plano_harry]

Don't know anything about 2500. I apply 50 cps (thin) at 350 rpm.

Harry

 

[Wood Butcher]

I run at the slowest speed cause I don't like it on my face and shirt.
WB

 

[Dan26]

I apply medium CA and spin the lathe by hand.

 

[Monty]

What is this new ca 2500s?

 

[Jim Burr]

Is 2500 a new Syfi flick or how much I won from the loser pool in Daily Trivia?!

 

[fisher]

Nexabond 2500s Wood Adhesive ,Quick Dry Thin.The thin is actually thicker then regular crazy glue.Almost like real light syrup is the best i can explain the consistency.
Shine's like crazy with Accelerator.Mirror surface .
Haven't tried on Acrylic or Stabilized Wood yet, Just Straight up Timber.

 

[Monty]

OK, this is more like a gel CA since the viscosity is listed at 3500 CPS. Thin CA is usually 5-50 CPS, medium CA is 100-500CPS and thick is 500-1500.
Usually, the thicker the CA (higher CPS number), the longer the cure time with out accelerator.