Wanted 1 1/8" square Crushed Turquoise blanks

Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad

444

Member
Joined
Dec 24, 2020
Messages
44
Location
Darlington, SC
If you are looking to make it go to the Alumilite site and check their videos on doing that and you can pick up the Alumilite products at most craft stores, Michels and Hobby Lobby.. To polish turquoise you use a buffing wheel.
 

MRDucks2

Member
Joined
Jul 17, 2017
Messages
3,215
Location
Bristow, IN
Do have a photo of what you are after? I was curious if I could make some but there is a lot a variability between color and size.
 
Joined
Dec 22, 2017
Messages
3,033
Location
Wolf Creek Montana
Here's what I'm looking for Mike. It's pretty common in pen blanks but if you can make anything even similar it would work. This pictures came out pretty big.

1615940851210.png
 

Dalecamino

Local Chapter Leader
Joined
Jan 2, 2008
Messages
14,569
Location
Indianapolis, In.
Excuse me for butting in....Mike, you can mix turquois color, cast it then break the cast into bits, then recast in a mold with whatever color Tom wants. Just an idea.
 

MRDucks2

Member
Joined
Jul 17, 2017
Messages
3,215
Location
Bristow, IN
Ahhh, as mentioned that looks like Trustone. Looks like Mark found the Tru source. I have also purchased from
https://www.randbcrafts.com/ and he sometimes has different sizes, may even cut his own. To get that look that would be the route to go.
 
Top Bottom