polishing

This Article is now available to download. https://www.penturners.org/resources/sanding-polishing-basics.486/ Introduction I thought I would provide some insights I've gleaned about sanding, now that we have this forum. I have gone through the process of learning how to properly sand for the...

Making a pen from some stainless- any tips on polish to use?

I did a search but didn't find anything that I felt answered my question. I don't have a Beal system or anything like it. All I have is basically Micro Mesh and Hut Ultra Gloss liquid. Any suggestions are welcome. Thanks.

Ok, I'm desperate! I have made several hybrid pen blanks with worthless wood alumilite clear (with dye added). I have orders for about 10 of these and can not get a good polish on the alumilite. I have found very little on the web, and even called alumilte. They refered me to their FAQs that...

I am very new to pen turning, I have only turned one pen so far, I've got about $100.00 worth of products coming mail order tomorrow.:biggrin: Here's my problem: I turned a Tycoon pen, used purple heart, which after I had the blanks cut and tubes glued in I was told purple heart doesn't...

I'm having a hell of a time getting small scratches out of acrylic blanks. After shaping and a final sand with 600 grit sand paper, I move to micro mesh. After going through all the pads with water (about 30 seconds on the most course then about 20 seconds on subsequent finer grits) I have...