Long 7mm drill bit

[Majorbdk]

Is there a place to buy a long 7mm drill bit? I have a 4" one. Does someone sell one that is 5" or longer?

 

[kirkfranks]

Here you go.
About 6 inches at the flutes.
About 7-7/8" overall length.

http://www.mcmaster.com/#88455a68/=48fkoi

 

[zig613]

Lee Valley sells a 7mm HSS parabolic-flute drill bit that is 6 inches long. Part #33J03.01

Wade

 

[Daniel]

Look for Aircraft pits.
7mm is .2756 inches Letter size bit "J" is .2770
you may have better luck finding a J bit.

 

[bradh]

Look for Aircraft pits.
7mm is .2756 inches Letter size bit "J" is .2770
you may have better luck finding a J bit.

A 9/32" bit is also a reasonable substitute.

 

[tseger]

A 9/32" bit is also a reasonable substitute.

9/32" is what I use. They are usually fairly easy to come by.

 

[Mack C.]

Is there a place to buy a long 7mm drill bit? I have a 4" one. Does someone sell one that is 5" or longer?

http://www.woodturnerscatalog.com/s...___Colt_5_Star_Pen_Drill___colt_pen_bits?Args=

 

[Crashmph]

http://www.woodturnerscatalog.com/s...___Colt_5_Star_Pen_Drill___colt_pen_bits?Args=

I am with Mack on these Colt 5-star bits. I have been using them for quite some time now and they are fabulous. A tad pricey but they are well worth it.

 

[dow]

I am with Mack on these Colt 5-star bits. I have been using them for quite some time now and they are fabulous. A tad pricey but they are well worth it.

Ditto on the Colt 5-star bits. I picked up a 7mm at Woodcraft last Saturday, so if you can't wait for CSUSA to mail it to you, then you might try woodcraft.

 

[Chris Bar]

Bought PSI's 5 1/5 inch brad point 7mm. at Woodcraft. Stays sharp so I decided to order other sizes of the same type from PSI; don't know the brand though.

 

[Majorbdk]

Thanks all ... I went to Woodcraft tonight and they have the Colt 7mm's.