Is Elderberry wood any good

Signed-In Members Don't See This Ad
bitshird

bitshird

Member
Joined
Aug 27, 2007
Messages
10,236
Location
Adamsville, TN, USA.
We are getting ready ro rip out a 10 year old elderberry tree/shrub/weed, and I was wondering whether to try and save some near the base of the main trunk which is about 4 inches Diameter or just whack it up and toss it on the burn pile? I have really had very poor luck at drying wood with out it cracking any way, but if this is decent wood I could peel the bark and stick pieces in hot paraffin wax, Opinions Please
 
Signed-In Members Don't See This Ad
Elderberry wood is good for elderberries, which is good for wine, which is nice by the glass when relaxing or making pens, so elderberry must be good for making pens!
 
jimbob91577 said:
Will that effect the migration of African Swallows?
Click to expand...

Only if they are flying south for the summer, and Elderberry wine is only suitable for those who can't find Muscadine Grape Wine YuuuuuuM.

I guess this is what I get for trying to ask a semi serious question, Perhaps I should rephrase it.
Has any one turned a pen from this wood/weed?? and was it worth the effort, I know various types of excrement can be turned if cast, but there again is that woth the effort, (unless you just want a real crappy pen)
 
Ken Any wood is worth trying , in my opinion . If there is heartwood/sapwood colour difference , it should be attractive . Also may be curl or crotch figure on the underside of a branch . Definitely wax the ends immediately after cutting (within a minute or two if a hot day ) . Willing to buy some from you if it looks good . Wayne
 
1080Wayne said:
Ken Any wood is worth trying , in my opinion . If there is heartwood/sapwood colour difference , it should be attractive . Also may be curl or crotch figure on the underside of a branch . Definitely wax the ends immediately after cutting (within a minute or two if a hot day ) . Willing to buy some from you if it looks good . Wayne
Click to expand...

Ok I am going to show my lack of knowledge here. Why would you wax the ends of the blanks other than to contain the sap?
 
Precisely to contain the sap . The pores in a tree are vertical structures through which the sap moves . Unwaxed ends allow the moisture to exit rapidly , which will result in severe end checking on most woods . Moisture loss through the bark is much slower , but less wood is wasted . As a very crude rule , you will lose 2 diameters of wood at each end if they are not protected . Even with wax or equivalent , you may lose a half diameter . Wayne
 
work it

elderberry can be good for turning and can be phenominal - like most wood
you never know what it holds until you get in there.
the worst wood I ever turned was good practice

~now go away or I shall be forced to taunt you a second time~
 
You must log in or register to reply here.
Back
Top Bottom