Vise Update, sneak peek!

Signed-In Members Don't See This Ad
Paul in OKC

Paul in OKC

Member
Joined
Jul 26, 2004
Messages
3,114
Location
Oklahoma City, OK, USA.
ell, as those of you waiting know, vise production is moving at a snails pace. Hard to get time in edge-wise when the job is taking 10+ hours a day of my time. BUT, I am making slow progress, and am getting to the next fine folks waiting on the list. (I will be in contact soon to those). Anyway, here is a sneak peek at the latest process!
 

Attachments

  • anodized2.jpg
    anodized2.jpg
    86.1 KB · Views: 495
Signed-In Members Don't See This Ad
Vice

Paul, I could not find the original post offering these. Can I get details. I was looking into getting something like this and reading the other posts, this IS the one to get. Thanks

Ruben Barrios
 
Oh boy, good things really do come to those that wait . . . .

In the meantime I bought one from Rockler to get my pen turning started . . . .

I know I'm already on the list, so I check my e-mail & PMs daily looking for a message from Paul . . .
 
I am sure the wait will be well worth it. Hopefully I will be getting mine soon. I am waiting patiently but I look in the email every day for the message from you. Make sure with 10 hour days you spend enough time with the family and also take some time for yourself.
 
At #18 on the next list, i'm now slobbering all over the keys, shallow breathing sweaty palms. Oh my, can't wait. This is gonna be great!
 
Hello Paul . . .

Any chance you could put out a list with waiting positions listed . . . .?

I know contacting every body individually would take too much time . . .

Steve
 
I'd sure like to get on the list. If you can put me on it. I'm in no hurry nine months is about how long it will take ne to save up money for it.
 
May look into hard anodizing next time, just wanted to get a feel for cost and looks first. Like I said (I think I said, anyway) I have been wanting to do this for a while, just needed a quantity of finished parts to keep the cost down. I should have a pic of an assembled vise this afternoon.
 
les-smith said:
Sooner red, I love it. But, I like my silver one, hehehe :smile:
Click to expand...

I beg your pardon! That is Razorback Red! Paul, can you put a white Razorback on one and I'll trade in my silver one! :biggrin:

However, my new son-in-law is an OU grad and a Boomer Sooner to the core. I'm working on him.:wink:
 
wow, if thats the colur mine will be i will be one happy chappy:eek::eek::eek::rolleyes: i must be near the front now paul? take care,
 
Here's the teaser pic

Here ya go, got this one ready at lunch today. You'll have to excuse the messy background off my desk. My office is about 3 1/2 feet wide and 5 feet deep. Seriously! so half of it is desk.
 

Attachments

  • red vise 1.jpg
    red vise 1.jpg
    85.5 KB · Views: 350
Last edited:
Momma always told me it wasn't right to hate someone, but you're pushing the envelope!

ME WANT! (and I don't even have a drill press)
 
Looks Really Good . . .

Paul in OKC said:
Here ya go, got this one ready at lunch today. You'll have to excuse the messy background off my desk. My office is about 3 1/2 feet wide and 5 feet deep. Seriously! so half of it is desk.
Click to expand...


That looks VERY nice . . . . you do really nice work . . . I love 1st class gadgets . . .

Steve
 
OK, I want one but can't find the original post. Could you please post the details on cost and add me to the waiting list?

And for the record guys, that thing looks Ohio State Buckeyes all the way!
 
Yeah, afriend of mine also mentioned Ohio State. Anyway, to get on the list, please send me an email at phdesigns1@yahoo.com and I will add your name. There is no obligation by getting on the list, just let me know one way or the other when your time comes.
Price in the future will go up $5 to $88 by Paypal, or $85 by money order. I hate to do that, but I have not increased the price in several years, and the cost of materials alone has gone up almost 50% in the last couple of years. Those who will get the current batch, the price is the same as previous. Next batch I have to get new material, so.....Sorry 'bout that.
 
I don't think . . .

Paul in OKC said:
Yeah, afriend of mine also mentioned Ohio State. Anyway, to get on the list, please send me an email at phdesigns1@yahoo.com and I will add your name. There is no obligation by getting on the list, just let me know one way or the other when your time comes.
Price in the future will go up $5 to $88 by Paypal, or $85 by money order. I hate to do that, but I have not increased the price in several years, and the cost of materials alone has gone up almost 50% in the last couple of years. Those who will get the current batch, the price is the same as previous. Next batch I have to get new material, so.....Sorry 'bout that.
Click to expand...

I don't think a price increase on anything now days will be a surprise to anyone . . . I do a little welding, as well as beginning woodwork and some of the stuff I used to call scraps are now referred to as " primo stock material" . . . . A father of a co-worker of mine is now making more off of his "aluminum can" route than he gets from Social In-Security . . . .

Steve - waiting with anticipation of a "new well made" gadget . . . .
 
Paul in OKC said:
... Price in the future will go up $5 to $88 by Paypal, or $85 by money order. ...
Click to expand...
Forgive a question from a newbie to this forum and someone who is anxiously awaiting delivery of my first pen-making supplies. I've spent quite a bit of time researching supplies and tools used in pen-making. One item I looked at is a drilling center vise, but decided to wait until I "get the fever" to order one. PSI has a beefy looking vise for $49.95; CSUSA has one for $39.99. What is the difference between your vise and the others that makes it cost so much more?
 
Comment . . . .

Bill Arnold said:
Forgive a question from a newbie to this forum and someone who is anxiously awaiting delivery of my first pen-making supplies. I've spent quite a bit of time researching supplies and tools used in pen-making. One item I looked at is a drilling center vise, but decided to wait until I "get the fever" to order one. PSI has a beefy looking vise for $49.95; CSUSA has one for $39.99. What is the difference between your vise and the others that makes it cost so much more?
Click to expand...

WELL, LET ME TELL YOU . . . . I ALREADY HAVE THE FEVER ! ! ! !

I have not put my hands on one of Paul's yet . . . But I would think it's the brass bushed jaws, the side holding method, the thick aluminum used for the base and jaws. The fact that it is being built completely by hand by a professional machinist is worth something.

Oh yea, one other thing, the 6 month waiting list by the most experienced pen turners on earth . . . . . . uuuum, I bet they have a good idea why it is worth the few extra dollars . . .

Personally I do not find the price of a tank of gas too much for a tool that will be the heart of your new chosen hobby.
( That comment nowdays applies to about everything . . . . GAS $$$$$$$$ . . . . . .)


By the way I already purchased a vise from Rockler, the nice one with provisions for a drawer and everything . . . . It was on sale . .

But yes the Rockler will do until my PH Design from Paul makes it in . . . actually, I may use the Rockler as to not get scratches on the PH Design Vise . . . . LOL LOL LOL

Forgive me if I seem a little excited about a well made American Made Tool . . . .

If you really want to save money on a method to hold your blanks, I saw a system that consist of two "V" notched boards with a hinge . . .

One side is mounted to a flat board & the other is allowed to swing . . . place your blank in, close, C-Clamp & drill. This is what I was going to do until my PH Design vise got in, but the wife insisted I buy a "nice" now vise NOW as to not prolong our new hobby . . . .

You will find several like the one Harbor Fright offered but even they pulled it from stock . .

Also you can use a regular screw clamp & "V" notch the jaws & then C-clamp it to the drill press table . . . .

http://www.rockler.com/product.cfm?page=11476&filter=pen blank vise

http://www.rockler.com/product.cfm?page=18062&filter=pen blank vise

The one directly above is what I bought as an interim vise . . .

P.S. I am a "newbie" pen turner, but a MASTER of buying quality tools . . . .
 
Last edited:
I have an early model of the PHD Sidevise and it is a gem. Here are some of it's advantages.

1. It is machined to tight tolerances. Nothing wobbles or flexes.
2. It is a side load vise which allows for quick loading when drilling multiple blanks.
3. It had a very wide jaw capacity. I use it for bottle stopper blanks when I make them.
4. It is lightweight but rugged. I've given mine quite a workout. In December it will be four years young.

I would sooner give up my Jet 1014VS mini-lathe than my PHD Sidevise.
 
Thanks, Lou, couldn't have said it better myself! When I started pen turning and looking at tools, I saw a picture of the centering vise from PSI. I didn't like the fact that it was only supported from one side. And no bushing on the rods made me think of how much slop there would need to be for it to move well. So being a perfectionist, I came up wioth my own, which developed into the current 'Side Vise'. I build a batch of parts, then I partly assemble, ream the bushings, and final assemble on a jig to assure squareness one at a time.
 
Let me clarify...

I didn't mean for my question to hit a nerve. I have an appreciation for quality tools, too. But, I just can't justify spending for what many might consider the top of the line for a specific item. In this case, I can see the advantages of the PHD design and will request to be put on the list.

:wink:
 
Bill Arnold said:
I didn't mean for my question to hit a nerve. I have an appreciation for quality tools, too. But, I just can't justify spending for what many might consider the top of the line for a specific item. In this case, I can see the advantages of the PHD design and will request to be put on the list.

:wink:
Click to expand...

No nerve hit. I don't mind giving reasons for they way I build things. I am cost conscience as well, and have bought a few tools to 'get by' that were very disappointing. I know my price is above the others, and I aim to give a product worthy of the investment cost.
 
Actually . . . .

Actually the Rockler is now $89.95 . . . .

And don't get me wrong it appears to be well made in comparison to the "sandwich presses" offered by the rest . . . but better ain't BEST ! ! ! !

My last comment, I promise . . . lol lol lol

I guess what I like so much about products like PH Design's is there are so few hobby related products where the average guy can afford the BEST of something . . .

I could only dream of justifying a 2436 ONEWAY, but with all the tips and upgrade gadgets available I surely can afford the most tricked out JET 1014 . . . .

And I hope I did not come off in my earlier post as "rude" towards the OP's pricing concerns for whatever reason . . . .
 
DCBluesman said:
I have an early model of the PHD Sidevise and it is a gem. Here are some of it's advantages.

1. It is machined to tight tolerances. Nothing wobbles or flexes.
2. It is a side load vise which allows for quick loading when drilling multiple blanks.
3. It had a very wide jaw capacity. I use it for bottle stopper blanks when I make them.
4. It is lightweight but rugged. I've given mine quite a workout. In December it will be four years young.

I would sooner give up my Jet 1014VS mini-lathe than my PHD Sidevise.
Click to expand...

I second this assessment. I waited for what seemed like forever for my PHD vise. And it is worth every minute I waited. I just recently drilled a Tru-Stone blank for the cap of a full size Gent, that was almost too small. With this vise it went down almost dead center all the way. My other vise would of blown it up for sure.
 
Boy I just can't stand it. I know I got to be getting near the top of that list. My currant vise from woodcraft is junk and driving me crazy.

The new vise looks great. I guess that is for the ones that sign up from hear on out. OR maybe the ones already waiting will get lucky.

Looks great Paul just can't stand the waiting. BUT I know we all have a life that gets in the way.
.
.
 
Signed-In Members Don't See This Ad
I believe the saying goes...

"All good things come to those that wait"

I too have one of Paul's earliest side-opening models and quickly trashed all other vises I had. It is a quality product that is worth its price. I purchased 3 other models before I got the PHD vise. I haven't needed another.
 
You must log in or register to reply here.
Back
Top Bottom