It's been a rather long time since I've turned a pen and life circumstances dictate that I'm not going to get back into it. I've previously sold off most of the pen turning specific stuff I had remaining, but hung onto some of the stuff for making custom pens as I had still hoped to make a few more of those. It's time to find a new home for these things.
Payment by PayPal.
Taps, Dies, and Drill Bits - $325 shipped in a SFRB
This could really get someone who's got none of this going. All of this is lightly used, some items never used - I made less than 10 custom pens in total.
Here's what's included:
M13 x 0.8 3LD (Triple Start) Tap & Die & 12.2mm Drill Bit
M10 x 0.75 Tap & Die & 9.25mm Drill Bit
M9 x 0.75 Tap & Die & 8.25mm Drill Bit
M6 x 0.75 Tap & Die
M7.4 x 0.5 Tap & 6.8mm Drill Bit (Jowo #6)
M7.5 x 0.5 Tap (Jowo #6)
M6.5 x 0.5 Tap (Schmidt Roller Writer Rollerball Tip)
M7.9 x 0.6 Tap & 7.3mm Drill Bit (Bock #6)
Drill Bits: R, N, J, 10.2MM
Mandrels I made included. As are various clips (from kit pens), 4 Schmidt Roller Writer Rollerball tips, and tenon gauge. Container NOT included. Will ship in a SFRB.
Neil's Niche Tailstock Tap/Die Holder - $90 shipped in a SFRB
Please note that this is missing the Stop Handle - it was lost in a move - but a replacement can be purchased.
6 Ebonite Rods from Nikko - $200 + shipping
All are 18mm unpolished, solid color. 1 meter in length.
3 black - one is short from using some and is 31 1/2".
1 Deepgreen
1 Red
1 Blue
Willing to ship however you'd prefer - and are willing to pay for. Whole or can cut down to fit a MFRB.
WorkSharp 3000 & Accesories - $250 + shipping
Has the following accessories with it:
Tool Bar Attachment
Belt Sharpening System (for sharpening knifes, scissors, etc)
Various extra discs and abrasives
Payment by PayPal.
Taps, Dies, and Drill Bits - $325 shipped in a SFRB
This could really get someone who's got none of this going. All of this is lightly used, some items never used - I made less than 10 custom pens in total.
Here's what's included:
M13 x 0.8 3LD (Triple Start) Tap & Die & 12.2mm Drill Bit
M10 x 0.75 Tap & Die & 9.25mm Drill Bit
M9 x 0.75 Tap & Die & 8.25mm Drill Bit
M6 x 0.75 Tap & Die
M7.4 x 0.5 Tap & 6.8mm Drill Bit (Jowo #6)
M7.5 x 0.5 Tap (Jowo #6)
M6.5 x 0.5 Tap (Schmidt Roller Writer Rollerball Tip)
M7.9 x 0.6 Tap & 7.3mm Drill Bit (Bock #6)
Drill Bits: R, N, J, 10.2MM
Mandrels I made included. As are various clips (from kit pens), 4 Schmidt Roller Writer Rollerball tips, and tenon gauge. Container NOT included. Will ship in a SFRB.
Neil's Niche Tailstock Tap/Die Holder - $90 shipped in a SFRB
Please note that this is missing the Stop Handle - it was lost in a move - but a replacement can be purchased.
6 Ebonite Rods from Nikko - $200 + shipping
All are 18mm unpolished, solid color. 1 meter in length.
3 black - one is short from using some and is 31 1/2".
1 Deepgreen
1 Red
1 Blue
Willing to ship however you'd prefer - and are willing to pay for. Whole or can cut down to fit a MFRB.
WorkSharp 3000 & Accesories - $250 + shipping
Has the following accessories with it:
Tool Bar Attachment
Belt Sharpening System (for sharpening knifes, scissors, etc)
Various extra discs and abrasives
