Kit storage

Signed-In Members Don't See This Ad

WriteON

Member
Joined
Aug 21, 2013
Messages
3,266
Location
S. Florida
My kit stock is currently in boxes, bags, draws, hamper, kitchen sink, bathroom etc. Was going to hang a peg board in a closet but considering a free standing rack. How are you storing your kits?
 

Attachments

  • 667D3A02-8329-4B25-A454-B529243A7949.png
    667D3A02-8329-4B25-A454-B529243A7949.png
    371.8 KB · Views: 113
Signed-In Members Don't See This Ad

egnald

Member
Joined
Jun 9, 2017
Messages
3,061
Location
Columbus, Nebraska, USA
Greetings from Nebraska.

Here is my setup (evolved over about 5 years):

I store most of my kits in drawers in a plastic storage unit. About 4 or 5 kits will fit in each drawer, so for some kits, the overflow goes into small plastic containers that are stacked on top.

In the photo you can also see the bulk of my plastic blanks inventory stored on a shelf under the drawer units, and to the side is a set of small plastic jars in boxes that house my bushing collection.

IMG_2090.JPG IMG_2092.JPG IMG_2094.JPG

I store my frequent use blanks in 5x8 bags hanging under a shelf. The overflow and bulk go into shoebox sized plastic containers and are stored on shelves above them.

IMG_2095.JPG IMG_2096.JPG

The drawer labels are color coded to kit families like Cigar, Sierra, Rollerball, Themed, etc. The same color code is used to help identify the correct bushings for each set which are stored in small jars inside little plastic boxes. The color coding is also used in the 3-ring binder I use to store instruction sheets for each kit style.
IMG_2099.JPG IMG_2100.JPG IMG_2097.JPG IMG_2098.JPG

I'm sure you will find a lot of ideas here and will come up with a good solution that works well for you.

Regards,
Dave
 

BCnabe

Member
Joined
Apr 17, 2013
Messages
103
Location
Hamilton, MI
Sports card (baseball, football, etc.) storage boxes work well for me. The rows for cards are about the same width as the pen kit bags.
1-BX-SSHOE_1_SUPER-SHOE-STORAGE-BOX-(3,000-CT.).jpg
 

RGVPens

Member
Joined
Oct 4, 2021
Messages
408
Location
Mission TX
Great setup Dave! I had a nice, organized setup for my scroll saw and woodworking shop in MO (18x30 shop). But after the move a month or so ago, into a much smaller shop, most everything is in a box...somewhere. 🤣

I need to spend 3-4 days, with the laptop shut off, just unboxing and organizing. I would get more done if I weren't stopping to look in boxes/totes for things I need to use! 🤣

I may "borrow" some of your ideas! Did you make all the labels and colored ones also? Or did they come off stuff shipped to you?
 

egnald

Member
Joined
Jun 9, 2017
Messages
3,061
Location
Columbus, Nebraska, USA
Great setup Dave! I had a nice, organized setup for my scroll saw and woodworking shop in MO (18x30 shop). But after the move a month or so ago, into a much smaller shop, most everything is in a box...somewhere. 🤣

I need to spend 3-4 days, with the laptop shut off, just unboxing and organizing. I would get more done if I weren't stopping to look in boxes/totes for things I need to use! 🤣

I may "borrow" some of your ideas! Did you make all the labels and colored ones also? Or did they come off stuff shipped to you?

Thanks for the compliment.

I made the labels using Microsoft Publisher 2013 on Avery 1 x 2 5/8 address labels. I use Publisher because it has a very nice option to print individual labels on a full sheet of 30 by specifying what row and column to start on. For the labels themselves, I used the Windows Snipping Tool to capture a picture of a pen made with the specific kit and pasted it into Publisher. (The PSI website has a nifty "CUSTOMIZE" tab on most of their kits that lets you design "configure" the plating and blank type which results in a nice picture that can be grabbed using the snipping tool).

I got the little plastic jars for bushings from our local Walmart store. There are 12 bottles in a little plastic box. They were made by Darice and were in the aisle where they sell beads and jewelry making craft stuff. (They also sell a similar one from another company that has 30 jars in it).

During my career at Vishay Dale Electronics, I was in charge of the Methods & Standards department for a few years. That's where I learned about LEAN Manufacturing and the 5-S principals for storage and labeling stuff. I got my storage cabinets (Akro-Mills) from our local Menards store. The drawers are about 4-1/4 by 5-1/4 and are 2-1/4 deep. The shoebox storage for my blanks was also from Menards and are Sterilite 6 quart size. Each one holds about 70 blanks either in bulk or in 5 x 8 plastic bags. I order the bags from someone on eBay.

If there is anything else I can help with, just let me know - Dave
 

KMCloonan

Member
Joined
Jun 13, 2017
Messages
1,459
Location
Round Lake, Illinois
I really like Butch's Cigar box setup. It's a shame I don't have a cigar store near me. 🤣
I also like Dave's arrangement. Mine is similar, although not nearly as elaborate.

My setup has evolved from piles of mailing envelopes that kits arrive in, to cardboard boxes with dividers. I knew I needed to be better organized, so over the last several years, I have been visiting the local goodwill - they seem to have a fairly constant supply of plastic bins, drawers, etc. I have been slowly collecting my items and putting them to good use.

Here is my Kit storage. Each drawer can be divided into 6 compartments. I gave the left and right sides of the drawers letter designations. Each drawer has 2 letters. I store different kits in each drawer/compartment. On my instructions sheet, I write the Kit drawer letter, so I don't have to rummage through a pile of kits.
IMG_0748.JPG IMG_0749.JPG IMG_0750.JPG

I also have smaller drawer units that where I store my bushings. I number the drawers sequentially, so far I am up to 24 drawers. Each drawer has 2 compartments, so I call them a & b. I write the bushing drawer # and a or b on the instructions sheet as well.
IMG_0751.JPG IMG_0752.JPG IMG_0753.JPG

My biggest challenge is keeping all of my raw materials organized. I have veneer in one flat drawer, I have fish paper in another. I have brass, copper, aluminum, and acrylic sheets of various colors all over the place. I also have a ton of lumber. I try to organize my cutoffs, leftover pieces in one small drawer unit, and I keep blanks I have bought, blanks I have stabilized, and blanks I have cut from boards in a 3 drawer unit
IMG_0754.JPG IMG_0755.JPG

Lastly, because I am so happy with my new Laguna 1216 lathe, I thought I would throw a photo of it on here, along with the extended stand that I turned into a small workbench with storage for my lathe, as well as glues, sandpaper, etc.

IMG_0756.JPG IMG_0757.JPG
 

WriteON

Member
Joined
Aug 21, 2013
Messages
3,266
Location
S. Florida
Slightly bulky and being stored in the house as shop is too hot. By Azar. This is it for now
 

Attachments

  • image.jpg
    image.jpg
    277.4 KB · Views: 86

monophoto

Member
Joined
Mar 13, 2010
Messages
2,542
Location
Saratoga Springs, NY
I don't do many pen kits anymore, but when I started into turning, I used plastic boxes that originally contained deli products. You can purchase new/empty boxes at the supermarket, or just buy ham in the deli section and recycle the boxes. I put labels on the end of the boxes, and stacked them on ClosetMaid wire shelving in the shop.
 

RGVPens

Member
Joined
Oct 4, 2021
Messages
408
Location
Mission TX
I like David's setup in NE, so I'm adapting a smaller version. This is what I've got so far.
I got the small white baskets to keep the pens in progress all together.
I still need to make labels fir the bins.
 

Attachments

  • IMG_0807.jpg
    IMG_0807.jpg
    93.5 KB · Views: 59
  • IMG_0806.jpg
    IMG_0806.jpg
    72.2 KB · Views: 69
Top Bottom