In search of a single tube twist..

Signed-In Members Don't See This Ad
Aces-High

Aces-High

Member
Joined
Jun 22, 2017
Messages
963
Location
Boulder, Colorado
I am looking for a good single tube twist pen that has the following:
1. Longer than sierra and clones, so over 2.21".
2. Has a decent shoulder. (This would exclude kits like the "executive")
3. Not themed.
Any suggestions are appreciated.

Jason
 
Last edited:
Signed-In Members Don't See This Ad
Take a look at Lazerlinez Liberty kit, 2.21" with 27/64 brass tube..made in USA, all stainless. Really good quality kits for $17.00.
 
Not sure if these are available over there, but the Polaris timber section is 2.8". Maybe the photo will help to see if this style is available (probably under a different name).

Cheers, Gary

DSC_0122a Coolibah Burl - Polaris.jpeg
 
Gary, the Polaris is indeed available in this part of the world. . It sometimes gets called Carbara. . And possibly another name also (Atlas ?).
 
Last edited:
It is with some hesitation, bearing in mind your word "good", that I humbly note the existence of the following .....

In addition to the Polaris, PSI has these: .... Duchess .... Falcon .... Crown Jewel

I have tried all of these (once only) except the Crown Jewel. . The Polaris is ok, but don't care for the styling.

I would be inclined to look at Berea, but they don't have their website as conveniently indexed as PSI does, so that would involve more work.

And the Dayacom website is quite hopeless to search. . And I am fairly sure CSUSA doesn't have anything.

If only some manufacturer would break with tradition and design a nice twist pen kit similar to Sierra but with barrel close to 3" long.
I once suggested this to Beaufort Ink around the time they came out with the "Sirocco", but they stuck with 2.21".
 
Last edited:
You can make one any length you want by modifying a slimline! (I just made 4 single tube modified slimlines yeaterday).Not sure what you mean by "decent shoulder"
 
Professor/Exemplar
GT Knurl (above)
ProX
Patriot (mentioned above)
Southwest Mesa
Majestic ( I think)
 
Bryguy said:
You can make one any length you want by modifying a slimline! (I just made 4 single tube modified slimlines yeaterday).Not sure what you mean by "decent shoulder"
Click to expand...

The shoulder is the distance from the tube to the outside of the finished pen at the hardware.
 
Knurl GT sounds like it might be a possibility.

Approximate Shoulder:
KnurlGT - .127
Prof/exemplar/executive - .075 This is way to skinny for my segmenting
Sierra - .093
Polaris (I also don't like the look of it) - .15
 
@Aces-High

Jason, now that you have specified some numbers, it would seem that what you are calling the shoulder is actually double what I would specify.
At least that's how I read the numbers. . In your immediately preceding post you give your definition of "shoulder" which actually agrees with mine

Also, I would like you to have a look at the pen kit called the "Capstone" on the website ... www.penblanks.ca ... and tell me how you like it.

I know that pen kit vendor does not ship to the USA .... but there are ways around that ;) ;)

It is a kit which is carried by no other "main" vendor that I know of and I don't know the original source. . I have tried it and it seems very sound, except possibly for the clip, but the clips on many pen kits are somewhat questionable, IMHO.
 
A couple of the old Smitty models come to mind,,, now carried by exotic blanks:

A 2.5" bodied Sierra Clone on a 9,5mm tube for extra "shoulder" (Le Roi LB V2):

LeRoi Long Body Pen Kit - Chrome & Black Chrome

This is the long barrel version of the Le Roi with a 3/8th (9.5mm) tube. This not only allows you to leave more 'meat' on the barrel (resulting in fewer blowouts as you turn near the bushings), but it is also engineered to have a longer barrel to show off your beautiful blank to the Max! These...
www.exoticblanks.com www.exoticblanks.com

A Polaris clone, perhaps more visually appealing than the namesake:

Le Roi Royale Pen Kit - Ti Gold

SPW'S exclusive Le Roi Royale Pen Kit. This is a Smitty's Pen Works exclusive revision of the popular Polaris-style pen kit. The Polaris-style tip and the longer barrel let you show off more of the wood or other pen blank material.Simple, Proven DesignEasy to Make! Single Tube DesignMix & Match...
www.exoticblanks.com www.exoticblanks.com
 
magpens said:
@Aces-High

Jason, now that you have specified some numbers, it would seem that what you are calling the shoulder is actually double what I would specify.
At least that's how I read the numbers. . In your immediately preceding post you give your definition of "shoulder" which actually agrees with mine

Also, I would like you to have a look at the pen kit called the "Capstone" on the website ... www.penblanks.ca ... and tell me how you like it.

I know that pen kit vendor does not ship to the USA .... but there are ways around that ;) ;)

It is a kit which is carried by no other "main" vendor that I know of and I don't know the original source. . I have tried it and it seems very sound, except possibly for the clip, but the clips on many pen kits are somewhat questionable, IMHO.
Click to expand...
That's an Interesting looking kit. What is the black at the end?
 
@Aces-High

The black end is a stone of sorts, I think ... not positive but looks like it and that's consistent with the name "Capstone".
 
In preparing this week's Sunday email, I became aware of the Yari, made for Berea, which we also sell.
Body length is over 2.5 inches, 3/8" drill bit and a fair amount of material left. Also will be on special at Exotics in the next couple hours, for the next week..
 
ed4copies said:
In preparing this week's Sunday email, I became aware of the Yari, made for Berea, which we also sell.
Body length is over 2.5 inches, 3/8" drill bit and a fair amount of material left. Also will be on special at Exotics in the next couple hours, for the next week..
Click to expand...

That's funny, I saw your email and thought of this thread!
 
You must log in or register to reply here.
Back
Top Bottom