Looking for special size small hinge source...

[Timbo]

I'm going to be doing some restoration work on a very realistic looking miniature barn. I'm going to have to replace some very rusted out hinges, but can't seem to locate the size I need (3/4" barrel length x 7/8" wide). I've searched ebay, etsy, as well as done general internet searches.

I did find slightly larger hinges but I'd rather not have to use these as it means modifying the many doors and door frames, I'd like to keep it as original as possible.

I was hoping one of you folks have a source for small hinges that may not be advertised very well. Thank you!

Tim

 

[Curly]

Have you tried Lee Valley? They have an extensive hardware section.

 

[ed4copies]

Mini Utility Hinges

pretty close

http://www.miniatures.com/Hinges-C166.aspx

more possibilities?

 

[dogcatcher]

Buy the hinge that is as close as you can get, then use a jewelers saw and a Dremel to "correct" the close as you can get to what you want. Hint buy extras, you will mess up at least one.

 

[jttheclockman]

I buy from here. Small Box Hardware - Brass & Nickel Plated Specialty Hardware

 

[Timbo]

Have you tried Lee Valley? They have an extensive hardware section.

Yup...Tried all the common sources. Thanks.

 

[Timbo]

Mini Utility Hinges

pretty close

Hinges @ miniatures.com

more possibilities?

Unfortunately, neither site offers the size I need. Thanks.

 

[Timbo]

Buy the hinge that is as close as you can get, then use a jewelers saw and a Dremel to "correct" the close as you can get to what you want. Hint buy extras, you will mess up at least one.

That's the backup plan, but I hope I don't have to use it!

 

[Timbo]

I buy from here. Small Box Hardware - Brass & Nickel Plated Specialty Hardware

I had already searched that site without success. Thanks.

 

[jttheclockman]

I buy from here. Small Box Hardware - Brass & Nickel Plated Specialty Hardware

I had already searched that site without success. Thanks.

Well do you have a photo so we know what you are talking about.

 

[magpens]

Have you checked out micromark.com ?

Search Results - Micro-Mark

 

[Timbo]

I buy from here. Small Box Hardware - Brass & Nickel Plated Specialty Hardware

I had already searched that site without success. Thanks.

Well do you have a photo so we know what you are talking about.

There's nothing special about it other than the size (7/8" wide x 3/4" barrel length), but a photo is included below. I can find 1" x 3/4" and 3/4" x 3/4", but the one I need is in between.


View in Gallery

 

[jttheclockman]

That is an odd design. Here is one but a bit ornate. I use all these companies too.

7/8" x 3/4" Brass Hinges w/Escutcheon Pins (pair)


7/8" x 3/4" Brass Plated Hinges



Box and Cabinet Hinges



Hinges, Small Brass Plated - National Artcraft

 

[Whitehat1994]

Hinges

Have you tried hobby lobby?

 

[Timbo]

Have you tried hobby lobby?

Yes...they're extremely limited I what they offer. Thanks.

 

[Timbo]

That is an odd design. Here is one but a bit ornate. I use all these companies too.

7/8" x 3/4" Brass Hinges w/Escutcheon Pins (pair)


7/8" x 3/4" Brass Plated Hinges



Box and Cabinet Hinges



Hinges, Small Brass Plated - National Artcraft

Success!!!...I think. Turns out CherryTreeToy and NationalArtCraft are the same vendor. NationalArtCraft will be going away soon according to the customer service rep. They have the hinges without the escutcheon pins in packs of 20. I'm going to order them and hope for the best. Thank you!!!

 

[jttheclockman]

That is an odd design. Here is one but a bit ornate. I use all these companies too.

7/8" x 3/4" Brass Hinges w/Escutcheon Pins (pair)


7/8" x 3/4" Brass Plated Hinges



Box and Cabinet Hinges



Hinges, Small Brass Plated - National Artcraft

Success!!!...I think. Turns out CherryTreeToy and NationalArtCraft are the same vendor. NationalArtCraft will be going away soon according to the customer service rep. They have the hinges without the escutcheon pins in packs of 20. I'm going to order them and hope for the best. Thank you!!!

Over the years I did my part in keeping Nation Art Craft in business. Can not blame that on me:biggrin::biggrin: