Getting the Cave ready for visitors

Signed-In Members Don't See This Ad
Dalecamino

Dalecamino

Local Chapter Leader
Joined
Jan 2, 2008
Messages
14,609
Location
Indianapolis, In.
A couple of good friends are coming to visit in a matter of days. So I thought I should get the Cave spruced up a bit. Kind of ....make it more presentable:rolleyes: These guys are traveling a good distance to get here and, I DON"T want them to be disappointed. DO I??:biggrin:

How did I do? :wink:
 

Attachments

  • IMG_1656 (2).jpg
    IMG_1656 (2).jpg
    262.9 KB · Views: 455
  • IMG_1657 (2).jpg
    IMG_1657 (2).jpg
    273.8 KB · Views: 458
Signed-In Members Don't See This Ad
Looks like a mess... Better get cracking... :biggrin:

I'm bringing a camera!!! NPDH...
 
Last edited:
Looks like you need some room for the chairs.

This can kind-of be a runthrough for when the real out-of-town guests arrive.
Looks better with each new picture. You are getting there Chuck.

I thought you went through all those boxes and put things away.
LOL
 
Charlie_W said:
Ah! It will only take you a few moments to get it in shape!:biggrin:

BTW, I hadn't thought of a SawZall as a pen turning tool!
Click to expand...
Don't rule out ANYTHING!:biggrin:

mark james said:
Looks like a mess... Better get cracking... :biggrin:

I'm bringing a camera!!! NPDH...
Click to expand...
IT IS!:redface:

stonepecker said:
Looks like you need some room for the chairs.

This can kind-of be a runthrough for when the real out-of-town guests arrive.
Looks better with each new picture. You are getting there Chuck.

I thought you went through all those boxes and put things away.
LOL
Click to expand...
NO....I said I cleaned out 4 boxes. :redface: As you can see...there's more :rolleyes:
 
I'ld find it kind of awkward working in that shop on pens....

The grinder is across the room from your lathe, meaning lots of back and forth when you want to touch up that edge.

The drill press is right next to the lathe, and I see a ton of bits hanging up across the room from it over by the grinder.

I'ld say, either swap the drill press and the grinder positions, or move the grinder and the bits over to the left side so it's all closer together.


The table saw is in a really awkward position too .... stuck in the corner where you can't really use it. I assume you pull it out each time you need it, but a better idea would be to make it more of a central island that you can use any time you need it. Possibly keep it against the back wall under the AC unit, but there you still run into issues with length of cut.
 
Can't please everyone...


Skie_M said:
I'ld find it kind of awkward working in that shop on pens....

The grinder is across the room from your lathe, meaning lots of back and forth when you want to touch up that edge.

The drill press is right next to the lathe, and I see a ton of bits hanging up across the room from it over by the grinder.

I'ld say, either swap the drill press and the grinder positions, or move the grinder and the bits over to the left side so it's all closer together.


The table saw is in a really awkward position too .... stuck in the corner where you can't really use it. I assume you pull it out each time you need it, but a better idea would be to make it more of a central island that you can use any time you need it. Possibly keep it against the back wall under the AC unit, but there you still run into issues with length of cut.
Click to expand...
 
Skie_M said:
I'ld find it kind of awkward working in that shop on pens....

The grinder is across the room from your lathe, meaning lots of back and forth when you want to touch up that edge.

The drill press is right next to the lathe, and I see a ton of bits hanging up across the room from it over by the grinder.

I'ld say, either swap the drill press and the grinder positions, or move the grinder and the bits over to the left side so it's all closer together.


The table saw is in a really awkward position too .... stuck in the corner where you can't really use it. I assume you pull it out each time you need it, but a better idea would be to make it more of a central island that you can use any time you need it. Possibly keep it against the back wall under the AC unit, but there you still run into issues with length of cut.
Click to expand...
YOU SIR, have quite an eye and, have great organizational ideas. BUT....in my case, these won't work. The grinder hasn't been used in many years (but I have one) it's just there. I use carbide cutters for all turnings. The bits are the main sizes I use for the metal lathe. They are on magnetic strips where, they are handy. But yes, I need to move the grinder (and other stuff) Haven't used the table saw since the cave was finished. It's light and, I move it outside to cut anything. It would be a very small island in there too :redface::biggrin: Thanks Gregory....keep them coming!:wink:
 
mark james said:
Can't please everyone...


Skie_M said:
I'ld find it kind of awkward working in that shop on pens....

The grinder is across the room from your lathe, meaning lots of back and forth when you want to touch up that edge.

The drill press is right next to the lathe, and I see a ton of bits hanging up across the room from it over by the grinder.

I'ld say, either swap the drill press and the grinder positions, or move the grinder and the bits over to the left side so it's all closer together.


The table saw is in a really awkward position too .... stuck in the corner where you can't really use it. I assume you pull it out each time you need it, but a better idea would be to make it more of a central island that you can use any time you need it. Possibly keep it against the back wall under the AC unit, but there you still run into issues with length of cut.
Click to expand...
Click to expand...
"I went to a garden party" Rick Nelson
 
stonepecker said:
Looks like you need some room for the chairs.

This can kind-of be a runthrough for when the real out-of-town guests arrive.
Looks better with each new picture. You are getting there Chuck.

I thought you went through all those boxes and put things away.
LOL
Click to expand...
I may get a couple of stools. Looking forward to your visit too Wayne. Wanna come on down now and.....HELP?:biggrin:
 
ROTFLMAO.

You have got to be kidding. In the last 36 hours I have had to tell people that I don't have the time to get their work done in the time frame they have given me.
Example.......Their parents died....one in 2003, the other in 2014. THEY want to order a tombstone from me that I have to order. (6 weeks waiting for stone) Nothing in my stock catches their eye. They want me to meet with the sexton.....find their grave spaces and get all the regulations from the cemetery board. Design and engrave their stone and have this all done before next weekend when their siblings are comming.
Nothing like a rush job.

I told them it isn't going to happen. They tell me that they know I can do it.
That is just one example. It seem that when the weatherman starts talking about what the future has in store.......the people all get in a rush.
And, I won't rush my work cause that is when mistakes happen ......not to mention accidents.


I will be planning the trip when the holidays are over Chuck. You will know when I am comming.
See you then. Heck, I will even bring you a chair for the cave.
 
Last edited:
Why is everyone in such as dang mood, it looks perfectly fine to me, much cleaner and neater than my cave, but then again mine is a real cave .....damn those pesky bats.
 
Mmmmm.....I wanna know how your Pretty Little Girly Studio got to be such a damned dump as you haven't used it since you built it !! :confused::biggrin:

Like the pink towels, btw.....kinda suits you!!


Sorry Chuck.....just rattling your cage as usual...:biggrin:
 
I would wait till the guest get there and let them clean it up for you.:biggrin:

You would think it would look somewhat neater being it was just built. Why is it that no matter how much room we dedicate to our shops it is never enough??:smile: Good luck.
 
I will be looking for some of the new Playboy centerfolds. I really have to ask what the world is comming to when the Playboy centerfolds change the history of the magazine.

Chuck, you need some 'art' on the walls for this to be a "Man Cave" At the very least a poster from Chevy corp.
 
Maybe a Snap-on Calendar or clock? Copenhagen sign? The possibilities are endless but poor Chucks time and money are not, sigh. Pop a top, salute the crowd and toast the "bunch of smart asses":biggrin:
 
Considering I haven't turned in a year, it's much cleaner than mine. Right now I have a Big Block Chrysler, Big Block Chevy, a few powerglides, and a ton of other car parts cluttering up my shop :)
 
stonepecker said:
ROTFLMAO.

You have got to be kidding. In the last 36 hours I have had to tell people that I don't have the time to get their work done in the time frame they have given me.
Example.......Their parents died....one in 2003, the other in 2014. THEY want to order a tombstone from me that I have to order. (6 weeks waiting for stone) Nothing in my stock catches their eye. They want me to meet with the sexton.....find their grave spaces and get all the regulations from the cemetery board. Design and engrave their stone and have this all done before next weekend when their siblings are comming.
Nothing like a rush job.

I told them it isn't going to happen. They tell me that they know I can do it.
That is just one example. It seem that when the weatherman starts talking about what the future has in store.......the people all get in a rush.
And, I won't rush my work cause that is when mistakes happen ......not to mention accidents.


I will be planning the trip when the holidays are over Chuck. You will know when I am comming.
See you then. Heck, I will even bring you a chair for the cave.
Click to expand...
Wayne! There is NO room for ANY chairs :redface::biggrin: But...the patio is right outside the door:wink::biggrin:

Skie_M said:
lol ... silly me! I thought your metal lathe was a grinder! :)
Click to expand...
Poor photography :biggrin:

OKLAHOMAN said:
Why is everyone in such as dang mood, it looks perfectly fine to me, much cleaner and neater than my cave, but then again mine is a real cave .....damn those pesky bats.
Click to expand...
FINALLY! A little support :biggrin: Thanks Roy!

Skie_M said:
Heh ... my cave is my living room with wood shavings all over the floor .... god forbid I have any guests any time this year. I really need to work on that whole "shop" thing ...
Click to expand...
That's exactly how I began my journey. In an apartment on a workbench in the dining area. So my new cave isn't so bad :biggrin:

skiprat said:
Mmmmm.....I wanna know how your Pretty Little Girly Studio got to be such a damned dump as you haven't used it since you built it !! :confused::biggrin:

Like the pink towels, btw.....kinda suits you!!


Sorry Chuck.....just rattling your cage as usual...:biggrin:
Click to expand...
:biggrin: It plagues me :redface:
The Pink towel:
1. I asked her for a super absorbent towel I could use in the shop
2. THAT is the one she brought to me:tongue:
3. Over here....REAL men wear Pink:biggrin::tongue:
4. I just use the towel to dry the lathe:tongue:
THANKS Steven!:wink:

mredburn said:
Dammit Chuck get a Budweiser lighted sign in there and get rid of the pink towels. People are starting to talk.
Click to expand...
Mike, you have so many wonderful ideas. I WOULD love to have one of those neon signs.

jttheclockman said:
I would wait till the guest get there and let them clean it up for you.:biggrin:

You would think it would look somewhat neater being it was just built. Why is it that no matter how much room we dedicate to our shops it is never enough??:smile: Good luck.
Click to expand...
Already thought of that JT. But they aren't coming here for that.:redface: It will likely be a mess no matter what I do.

stonepecker said:
I will be looking for some of the new Playboy centerfolds. I really have to ask what the world is comming to when the Playboy centerfolds change the history of the magazine.

Chuck, you need some 'art' on the walls for this to be a "Man Cave" At the very least a poster from Chevy corp.
Click to expand...
I'm thinking I'll need some shelves on those walls (what's left of them)
 
You remember that one thread that talks about using the craft foam for application of CA?

Well, it has another application too, pun fully intended.

Get a full sheet of the craft foam (or whatever size you think will fit on your lathe bed while wet sanding) and a few of the little neodymium magnets for craft work ... put two on the craft foam so that they hold the foam to your lathe bed in the proper position to catch drips. Cut any excess foam away that you think will be in the way, and then superglue the magnets to the foam while it's still right there on the lathe.

This way, the foam is re-useable and will stick magnetically to your lathe ways ... it's waterproof and will protect the lathe bed from rust while you do your wet sanding or decal work.

To keep water from pooling and then dripping onto the lathe, fold a paper towel and lay it on top the craft foam. Toss it if it gets too wet, or just squeeze out the excess water and lay it back down if you're not done using it yet.


This works especially great for those lathes designed to have the MOTOR mounted directly beneath the spindle where the WATER WOULD DRIP ON IT if you don't prevent it from happening.


(PS ... grab the foam while you're doing CA application too ... will keep the CA from getting all over the lathe bed.)
 
Last edited:
mredburn said:
Maybe a Snap-on Calendar or clock? Copenhagen sign? The possibilities are endless but poor Chucks time and money are not, sigh. Pop a top, salute the crowd and toast the "bunch of smart asses":biggrin:
Click to expand...

hcpens said:
ONLY one thing to say - looks like a very busy wood worker's cave.
Click to expand...

Rick_G said:
Much cleaner than my shop, I'd rather make stuff than clean.
Click to expand...

EBorraga said:
Considering I haven't turned in a year, it's much cleaner than mine. Right now I have a Big Block Chrysler, Big Block Chevy, a few powerglides, and a ton of other car parts cluttering up my shop :)
Click to expand...

Skie_M said:
You remember that one thread that talks about using the craft foam for application of CA?

Well, it has another application too, pun fully intended.

Get a full sheet of the craft foam (or whatever size you think will fit on your lathe bed while wet sanding) and a few of the little neodymium magnets for craft work ... put two on the craft foam so that they hold the foam to your lathe bed in the proper position to catch drips. Cut any excess foam away that you think will be in the way, and then superglue the magnets to the foam while it's still right there on the lathe.

This way, the foam is re-useable and will stick magnetically to your lathe ways ... it's waterproof and will protect the lathe bed from rust while you do your wet sanding or decal work.

To keep water from pooling and then dripping onto the lathe, fold a paper towel and lay it on top the craft foam. Toss it if it gets too wet, or just squeeze out the excess water and lay it back down if you're not done using it yet.


This works especially great for those lathes designed to have the MOTOR mounted directly beneath the spindle where the WATER WOULD DRIP ON IT if you don't prevent it from happening.


(PS ... grab the foam while you're doing CA application too ... will keep the CA from getting all over the lathe bed.)
Click to expand...
Great process! But....I'm going to want a new lathe someday. This one has held up since 2006 and so far shows no sign of quitting. So....I'm going to rust the hell out of it :wink::biggrin:
 
Hell,
Chuck can hold his own contest for the 12th Bash and make it a year long.

Which ever of his friends comes to visit him from the greatest distance, he can give them the lathe. (it is up to the winner to pay shipping).
This is one contest that Skiprat has a real chance in winning.

THEN, Chuck can get a new lathe. Maybe his bride will get him one for Christmas 2016.
Of course, he could put up a donation jar just inside the Cave and we all could chip in.
 
Last edited:
stonepecker said:
Hell,
Chuck can hold his own contest for the 12th Bash and make it a year long.

Which ever of his friends comes to visit him from the greatest distance, he can give them the lathe. (it is up to the winner to pay shipping).
This is one contest that Skiprat has a real chance in winning.

THEN, Chuck can get a new lathe. Maybe his bride will get him one for Christmas 2016.
Of course, he could put up a donation jar just inside the Cave and we all could chip in.
Click to expand...
I'll get my own lathe when the time comes. There's a limit to how much I want to owe her :wink::biggrin:

I like the donation jar idea :biggrin:
Chuck can hold his own contest for the 12th Bash and make it a year long
Maybe Derek will run the contest. He's good at stealing competitors. Shameless Varmint!!
 
Last edited:
dalecamino said:
stonepecker said:
Hell,
Chuck can hold his own contest for the 12th Bash and make it a year long.

Which ever of his friends comes to visit him from the greatest distance, he can give them the lathe. (it is up to the winner to pay shipping).
This is one contest that Skiprat has a real chance in winning.

THEN, Chuck can get a new lathe. Maybe his bride will get him one for Christmas 2016.
Of course, he could put up a donation jar just inside the Cave and we all could chip in.
Click to expand...
I'll get my own lathe when the time comes. There's a limit to how much I want to owe her :wink::biggrin:

I like the donation jar idea :biggrin:
Chuck can hold his own contest for the 12th Bash and make it a year long
Maybe Derek will run the contest. He's good at stealing competitors. Shameless Varmint!!
Click to expand...

First of all: I didn't steal them. I just "borrowed" them for the month of Feb. After that I gave them back.

Second of All: Shameless Varmit.....Ever hear that old addage about catching flies with honey?
 
D.Oliver said:
dalecamino said:
stonepecker said:
Hell,
Chuck can hold his own contest for the 12th Bash and make it a year long.

Which ever of his friends comes to visit him from the greatest distance, he can give them the lathe. (it is up to the winner to pay shipping).
This is one contest that Skiprat has a real chance in winning.

THEN, Chuck can get a new lathe. Maybe his bride will get him one for Christmas 2016.
Of course, he could put up a donation jar just inside the Cave and we all could chip in.
Click to expand...
I'll get my own lathe when the time comes. There's a limit to how much I want to owe her :wink::biggrin:

I like the donation jar idea :biggrin:
Chuck can hold his own contest for the 12th Bash and make it a year long
Maybe Derek will run the contest. He's good at stealing competitors. Shameless Varmint!!
Click to expand...

First of all: I didn't steal them. I just "borrowed" them for the month of Feb. After that I gave them back.

Second of All: Shameless Varmit.....Ever hear that old addage about catching flies with honey?
Click to expand...
No.....you're confused.. borrowing is obtaining with permission:wink: Without permission it's STEALING :biggrin: How much Honey are we talking about? Never mind your criminal history. We don't care about that. :biggrin: Just need a good contest aimed at getting Skiprat to let loose of some of those shillings:biggrin:
 
Whoa, wait, who said anything about shingles?

Don't those go on the roof?

I like the cedar ones that they put on the side of your house, too .... I found out that enough for 100 square feet of siding costs about 100 dollars.
 
stonepecker said:
I have had shingles.....you can have them. Hurt and itch like hell.
Click to expand...
NOT Shingles!!!:mad: Shillings.....that's what they call some of their coins over where Skiprat lives (most of the time) 'cept when he's off in some other nation building stuff...or whatever he does:rolleyes: and, keep your itchy stuff for yourself :wink:

Skie_M said:
Whoa, wait, who said anything about shingles?

Don't those go on the roof?

I like the cedar ones that they put on the side of your house, too .... I found out that enough for 100 square feet of siding costs about 100 dollars.
Click to expand...
No....the coins don't go on the roof....or the side of the house. They go in my pocket. But $100.00 works for ME!!:biggrin: I'll PM my paypal addy :biggrin:
 
Signed-In Members Don't See This Ad
You must log in or register to reply here.
Back
Top Bottom