Feather Blank - First Attempt
- Thread starter SteveJ
- Start date
Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad
avbill
Member
well kept trying be sure to write down what you did so you can learn from the first
OKLAHOMAN
Member
Steve, is that one of our blanks made by Marla? If so let me know and we will replace it at no charge.
SteveJ
Member
It was, but it doesn't seem right to have you replace it - especially since I got it with a gift certificate you donated in the first place!
Charlie_W
Member
Mount it on that block as is....call it art!
The title of this piece could be "Breaking Free" !
triw51
Member
That hurts I have done similar turnings and feel your pain and frustration
SteveJ
Member
I got an email saying that you have sent a replacement. I thank you very much. I did not however, expect you to do that, and I certainly didn't post this to indicate that something was wrong with the blank. I believe the blow up was my fault and not yours.
I am sorry if posting this was taken in any way to be critical of either Classic Nib or Marla's blanks.
Sending a replacement blank is far above and beyond my expectations. Thank you.
SteveJ
Member
I was actually turning at about 1,100 RPM.
Charlie_W
Member
Can you tell us what type of chisel you were using and in what orientation to the turning blank?
SteveJ
Member
I was using a carbide tool, one with the slight curve (not round). I was pretty square to the blank, flat on the tool rest and just at the center line. The blank had turned beautifully and I had just gotten to the bushings, so was "evening out" the blank when I blew it up. I turn between centers on a Shopsmith. In retrospect, I should probably have sanded down the slight ridges I felt instead of using the carbide tool at that point.
Last edited:
OKLAHOMAN
Member
Steve, nothing to be sorry about, we at Classic's are happy to replace the blank as we give a 100% guarantee, no questions asked. We only require a photo and to be honest some of the reply's to the post gave us a much needed laugh today.
Just keep dealing with the Vendors here at the IAP as all of us will treat you as family.